Brocade Fibre Channel Networking Community

Expand all | Collapse all

how to check what wwn was connected after a port went offline

  • 1.  how to check what wwn was connected after a port went offline

    Posted 05-16-2017 04:24 AM

    Hi All,

     

    Can you please help if there is command to check what wwn or device was connected on a specific port before it went offline in case i do not have supportshow.


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: how to check what wwn was connected after a port went offline

    Posted 05-16-2017 05:10 AM

    Hi,

     

    starting with FOS 7.4.x there is a command:

     

    portloginshow [Port] -history

     

    It will show you all recent WWN logouts.

     

    If you are below 7.4 it will be difficult...

     

    TL


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: how to check what wwn was connected after a port went offline

    Posted 05-16-2017 01:45 PM

    Hi,

     

    earlier release ((at least from 7.2) there is nsdevlog which can be used like

     

    nsdevlog --show -port

     

    or

     

    nsdevlog --show -slot

     

     


    #BrocadeFibreChannelNetworkingCommunity