Brocade Fibre Channel Networking Community

Expand all | Collapse all

8510 CR16-8

  • 1.  8510 CR16-8

    Posted 05-12-2017 08:03 AM

    Does anyone know if part number 60-1002054-12 is the current part number for the CR16-8 blade?


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: 8510 CR16-8

    Posted 05-12-2017 08:50 AM

    @Wayne Duglin

     

    AFAIK, the Factory part Number is

     

    60-1002140-0x

     

    ( where x is the number example 01, 02 and so on..... )


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: 8510 CR16-8

    Posted 05-12-2017 08:56 AM

    Is 60-1002054-12 an older version?


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: 8510 CR16-8

    Posted 05-12-2017 10:02 AM

     

     

    No , 60-1002054-12  it's the current mfg part number .for blade CR16-8

     

    Regards

    Jerome

     

    Brocade RTSE EMEA

     

     

    Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided
    solely as a convenience for Brocade customers. All systems and all networks are different and unique.
    If you have a service affecting network problem, please open a TAC service request for service through
    Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please
    mark it with the button at the bottom "Accept as solution". 

     


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: 8510 CR16-8

    Posted 05-12-2017 08:54 AM

     

    HI ,

     

    You right

     

    60-1002054-12 is  the current part number  of  a Core CR16-8 blade 

     

    Regards

    Jerome

     

    Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided
    solely as a convenience for Brocade customers. All systems and all networks are different and unique.
    If you have a service affecting network problem, please open a TAC service request for service through
    Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please
    mark it with the button at the bottom "Accept as solution".


    #BrocadeFibreChannelNetworkingCommunity