Brocade Fibre Channel Networking Community

Expand all | Collapse all

Invalid Ordered Sets

  • 1.  Invalid Ordered Sets

    Posted 11-12-2015 03:57 PM

    I've looked around and have found limited resources with troubleshooting a possible issue I'm having in my Brocade M5424.

     

    From the manaul I've read my fillword is suppose to be set to 0, which it is. So, any documentation on what else my problems could be? Sorry if this is a simple quesiton I recently inherited this thing.

     

    stat_wtx 2099820505 4-byte words transmitted
    stat_wrx 1977624070 4-byte words received
    stat_ftx 4150593694 Frames transmitted
    stat_frx 3630626373 Frames received
    stat_c2_frx 0 Class 2 frames received
    stat_c3_frx 3630626373 Class 3 frames received
    stat_lc_rx 0 Link control frames received
    stat_mc_rx 0 Multicast frames received
    stat_mc_to 0 Multicast timeouts
    stat_mc_tx 0 Multicast frames transmitted
    tim_rdy_pri 0 Time R_RDY high priority
    tim_txcrd_z 172 Time TX Credit Zero (2.5Us ticks)
    tim_txcrd_z_vc 0- 3: 0 0 172 0
    tim_txcrd_z_vc 4- 7: 0 0 0 0
    tim_txcrd_z_vc 8-11: 0 0 0 0
    tim_txcrd_z_vc 12-15: 0 0 0 0
    er_enc_in 0 Encoding errors inside of frames
    er_crc 0 Frames with CRC errors
    er_trunc 0 Frames shorter than minimum
    er_toolong 0 Frames longer than maximum
    er_bad_eof 0 Frames with bad end-of-frame
    er_enc_out 0 Encoding error outside of frames
    er_bad_os 2826930324 Invalid ordered set
    er_rx_c3_timeout 0 Class 3 receive frames discarded due to timeout
    er_tx_c3_timeout 0 Class 3 transmit frames discarded due to timeout
    er_c3_dest_unreach 0 Class 3 frames discarded due to destination unreachable
    er_other_discard 19 Other discards
    er_type1_miss 0 frames with FTB type 1 miss
    er_type2_miss 0 frames with FTB type 2 miss
    er_type6_miss 0 frames with FTB type 6 miss
    er_zone_miss 0 frames with hard zoning miss
    er_lun_zone_miss 0 frames with LUN zoning miss
    er_crc_good_eof 0 Crc error with good eof
    er_inv_arb 0 Invalid ARB
    open 0 loop_open
    transfer 0 loop_transfer
    opened 0 FL_Port opened
    starve_stop 0 tenancies stopped due to starvation
    fl_tenancy 0 number of times FL has the tenancy
    nl_tenancy 0 number of times NL has the tenancy
    zero_tenancy 0 zero tenancy
    phy_stats_clear_ts 12-21-2014 UTC Sun 13:02:41 Timestamp of phy_port stats clear
    lgc_stats_clear_ts 12-21-2014 UTC Sun 13:02:41 Timestamp of lgc_port stats clear

     

     

    Area Number: 4
    Speed Level: SOFT
    Fill Word(On Active) 0(Idle-Idle)
    Fill Word(Current) 0(Idle-Idle)
    AL_PA Offset 13: OFF
    Trunk Port OFF
    Long Distance OFF
    VC Link Init OFF
    Locked L_Port OFF
    Locked G_Port ON
    Disabled E_Port ON
    Locked E_Port OFF
    ISL R_RDY Mode OFF
    RSCN Suppressed OFF
    Persistent Disable OFF
    LOS TOV enable OFF
    NPIV capability ON
    QOS Port AE
    Port Auto Disable: OFF
    Rate Limit OFF
    Mirror Port OFF
    SIM Port OFF
    Credit Recovery ON
    F_Port Buffers OFF
    E_Port Credits OFF
    Fault Delay: 0(R_A_TOV)
    NPIV PP Limit: 126
    CSCTL mode: OFF


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Invalid Ordered Sets

    Posted 11-12-2015 05:44 PM

    These stats were cleared a year ago so you might want to create a new baseline first.

     

    Enter the command "statsclear".

     

    Then check if they are increasing.

     

    For more info on fillwords look here: http://www.erwinvanlonden.net/tag/fillwords/

     

     


    #BrocadeFibreChannelNetworkingCommunity