Brocade Fibre Channel Networking Community

troble whith 2005 16b

  • 1.  troble whith 2005 16b

    Posted 01-19-2016 10:52 PM

    hi all. my switch 16b died ;( 

     

    Spoiler
    Spoiler

    The system is coming up, please wait...

    Read board ID of 0x80 from addr 0x23

    Read extended model ID of 0x19 from addr 0x22

    Matched board/model ID to platform index 6

     

    Read board ID of 0x80 from addr 0x23

    Read extended model ID of 0x19 from addr 0x22

    Matched board/model ID to platform index 6

    Checking system RAM - press any key to stop test

     

    Checking memory address: 00100000

     

    System RAM test using Default POST RAM Test succeeded.

     

    Press escape within 4 seconds to enter boot interface.

    Booting "Fabric Operating System" image.

    Entry point at 0x01000000 ...

     

    loading kernel

     

    loaded at:     01000000 013F7364

    board data at: 013F5324 013F5364

    relocated to:  01005110 01005150

    zimage at:     0100597D 01169E3A

    initrd at:     0116A000 013F4C00

    avail ram:     013F8000 08000000

     

    Linux/PPC load:

    BootROM command line: quiet

    Uncompressing Linux...done.

    Now booting the kernel

    PCI: Cannot allocate resource region 0 of device 0000:00:00.0

    Installing Linux 2.6 Kernel

    Detected previous filesystem shutdown on hda1. Starting Recovery.

    Filesystem check complete.

    Attempting to find a root file system on hda1...

    Attempting to find a root file system on hda2...

    INIT: version 2.78 booting

    error writing /etc/mtab.tmp: No space left on device

    mount: you must specify the filesystem type

    Failed to mount the secondary image

    --- Cannot mount the secondary partition.

    --- System is rebooting for recovery.

    Restarting system.

     

     

    > printenv

    AutoLoad=yes

    BadRootDev=hda1

    ENET_MAC=00051E080DF5

    InitTest=MEM()

    LoadIdentifiers=Fabric Operating System;Fabric Operating System

    OSLoadOptions=quiet

    OSLoader=ATA()0x20a40;ATA()0x50e60

    OSPartitionState=shutdown;clean

    OSRootPartition=hda1;hda2

    SkipWatchdog=yes

     please tell me what I can do to make it work?


    #san
    #storagenetworking
    #BrocadeFibreChannelNetworkingCommunity
    #fibrechannel