Brocade Fibre Channel Networking Community

Re: FOS 6.4.3 to 7.0.0c upgrade failed

  • 1.  Re: FOS 6.4.3 to 7.0.0c upgrade failed

    Posted 01-31-2013 03:12 AM

    Hello SAN101, see this example of an Actionplan/recomments

    The following entries in the output of configshow -all will stop any attempt to upgrade to 7.x until

    the values are changed to 0:


    I would recommend performing the following actions in order to change the values from 2 to 0.

    1. Execute the configupload -all command on the switch and upload the configuration file to an FTP/SCP server.

    2. Open the file via basic text editor such as notepad, locate the noted entries, and replace the value of 2 with 0.

    3. Perform a configdownload -all on the switch and download the edited configuration file to the switch.

    4. Once complete, verify the values have changed to 0 on the switch with the following commands:

    configshow -all | grep PerfRx.changed

    configshow -all | grep ZC.changed

    The customer should then be able to complete the firmware upgrade successfully.

    rgds Michael