Brocade Fibre Channel Networking Community

Expand all | Collapse all

6510 not able to part of Fabric due to the AD features is Enabled

  • 1.  6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-09-2016 12:12 AM

    Am trying to solve the problem as two 6510 performing config default unable to form a fabic giving Segmented Zone error . As metioned Below one of the Fabric having AD Feature: Active  how do I disable the feature . I believe this causing the issue . 

     

    Regards,

      Jay

     

    BDC-IDF-Core-A-6510:admin> switchshow
    switchName: BDC-IDF-Core-A-6510
    switchType: 109.1
    switchState: Online
    switchMode: Native
    switchRole: Principal
    switchDomain: 100
    switchId: fffc64
    switchWwn: 10:00:00:27:f8:8f:92:11
    zoning: ON (EPV_IDF_Core_A)
    switchBeacon: OFF
    FC Router: OFF
    FC Router BB Fabric ID: 1
    Address Mode: 0
    HIF Mode: OFF

     

     

     

    BDC-IDF-Core-B-6510:admin> switchshow
    switchName: BDC-IDF-Core-B-6510
    switchType: 109.1
    switchState: Online
    switchMode: Native
    switchRole: Principal
    switchDomain: 90
    switchId: fffc5a
    switchWwn: 10:00:00:27:f8:8c:be:39
    AD Feature: Active
    Current AD: 0
    zoning: OFF
    switchBeacon: OFF
    FC Router: OFF
    FC Router BB Fabric ID: 1
    Address Mode: 0
    HIF Mode: OFF

    .


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: 6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-09-2016 12:53 AM

    Please, give the output of "ad --show" in 255 AD-context


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: 6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-19-2016 03:53 AM
    BDC-IDF-Core-B-6510:AD255:admin> ad --show Current AD Number: 255 AD Name: AD255 Transaction buffer configuration: --------------------------------- no configuration Defined configuration: ---------------------- AD Number: 0 AD Name: AD0 State: Active Device WWN members: 50:06:01:60:b0:22:03:f0; 21:00:00:e0:8b:94:8f:f0; 21:00:00:e0:8b:94:3a:f1; 20:00:00:e0:8b:94:8f:f0; 20:00:00:e0:8b:94:3a:f1; 50:06:01:68:30:22:03:f0; Effective configuration: ------------------------ no configuration BDC-IDF-Core-B-6510:AD255:admin> BDC-IDF-Core-A-6510:AD255:admin> ad --show Current AD Number: 255 AD Name: AD255 Transaction buffer configuration: --------------------------------- no configuration Defined configuration: ---------------------- no configuration Effective configuration: ------------------------ no configuration BDC-IDF-Core-A-6510:AD255:admin> ----- On one of the switch am unable to delete the config . can you let me know how to clear the config.
    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: 6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-19-2016 04:26 AM

    Tried to clear the Config but couldn't .

     

    BDC-IDF-Core-B-6510:AD255:admin> ad --clear -f
    You are about to delete all ADs definitions and zone databases under them.
    This could involve multiple independent zone transactions and
    no auto recovery will be done in case of failure in the middle.
    Do you want to clear all admin domains (yes, y, no, n): [no] t^?y
    Input not acceptable, please re-enter
    Do you want to clear all admin domains (yes, y, no, n): [no] y
    BDC-IDF-Core-B-6510:AD255:admin>
    BDC-IDF-Core-B-6510:AD255:admin>
    BDC-IDF-Core-B-6510:AD255:admin> ad --apply

    Set defzone mode to noaccess in AD0 context before configuring ADs

     


    BDC-IDF-Core-B-6510:AD255:admin> ad --show
    Current AD Number: 255 AD Name: AD255

    Transaction buffer configuration:
    ---------------------------------
    no configuration

    Defined configuration:
    ----------------------

    AD Number: 0 AD Name: AD0 State: Active

    Device WWN members: 50:06:01:60:b0:22:03:f0;
    21:00:00:e0:8b:94:8f:f0;
    21:00:00:e0:8b:94:3a:f1;
    20:00:00:e0:8b:94:8f:f0;
    20:00:00:e0:8b:94:3a:f1;
    50:06:01:68:30:22:03:f0;

    Effective configuration:
    ------------------------
    no configuration

    BDC-IDF-Core-B-6510:AD255:admin>


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: 6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-19-2016 04:49 AM

    Hi!

    For the first make defzone --noaccess and cfgsave in all ADs.

    For the second try ad --deactivate AD_ID (in your case - 0) in 255 context, ad --save.

    Try ad --clear -f from 255 context  and ad --save.


    #BrocadeFibreChannelNetworkingCommunity


  • 6.  Re: 6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-09-2016 07:15 AM

    Also please check if the defzone settings do match on both sides (defzone --show)


    #BrocadeFibreChannelNetworkingCommunity


  • 7.  Re: 6510 not able to part of Fabric due to the AD features is Enabled

    Posted 09-12-2016 06:38 AM

    Further, details on how clean out / remote AD per "Deleting all user-defined Admin Domains non-disruptively" are at

     

    http://www.brocade.com/content/html/en/administration-guide/fos-741-adminguide/GUID-5B3ADBCA-750A-4B66-8C3A-213F259C721F.html

     

     

     

     


    #BrocadeFibreChannelNetworkingCommunity