Brocade Fibre Channel Networking Community

Expand all | Collapse all

Brocade and ADVA FSP3000 Compatibility Matrix

  • 1.  Brocade and ADVA FSP3000 Compatibility Matrix

    Posted 09-13-2013 07:47 AM
      |   view attached

    Hello,

    IHAC thats has delpoyed a WDM ADVA FSP3000, so I'm looking the compatibility Matrix for 6510 and 300.

    The customer i using the following board:


    • 1063707620-01 5TCE-PCTN-10GU+10G-V#DC
    • 1063703200 2WCA-PCN-10G

    I don't understand if are really supported by Brocade Compatibility Matrix, probably Brocade use truncated name.

    Please,   does anyone can tell me if  boards are supported for Brocade 6510 ? 

    We are using longwave SFP but I guess that is irrelevant.

    Thanks in advance

    Best regards

    Romeo


    #BrocadeFibreChannelNetworkingCommunity

    Attachment(s)



  • 2.  Re: Brocade and ADVA FSP3000 Compatibility Matrix

    Posted 09-13-2013 08:17 AM

    romeo,

    I've connected by customer at February 2013, ADVA FSP3000-R7.

    however, both Board you listed here are Ethernet Port, and such are not supported neither 300 and 6510.

    To make sure, is probable I'm wrong, I would suggest you open a Call with ADVA.

    If you don't have direct Support access to ADVA, and the WDM was installed by a Carrier, then you should open a Call with the Carrier.


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Brocade and ADVA FSP3000 Compatibility Matrix

    Posted 09-13-2013 08:51 AM

    I know that You are already talking about that with Gaspare. Thanks for your help.

    Best regards,

    Romeo


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Brocade and ADVA FSP3000 Compatibility Matrix

    Posted 09-13-2013 09:23 AM

    Romeo,

    I've shared some ADVA DOC and Manuals, you should get a email.


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: Brocade and ADVA FSP3000 Compatibility Matrix

    Posted 09-13-2013 12:48 PM

    Hi,

    the ADVA FSP 3000

    5TCE family and

    2WCA family

    are both supported and qualified with CONDOR II and CONDOR III HW from Brocade for 4/8/10G FC

    LX or SX is not taken into account

    Let me knowif you have any further questions

    Cheers

    uli


    #BrocadeFibreChannelNetworkingCommunity