Brocade Fibre Channel Networking Community

Expand all | Collapse all

This operation is not supported on this platform

  • 1.  This operation is not supported on this platform

    Posted 07-10-2018 06:09 AM

    Hi,
    I want change my switch M5424 mode from Access Gateway to Native mode, I used this commande "ag --modedisable" but dose not working, error message appear This operation is not supported on this platform.
    Thanks.


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: This operation is not supported on this platform

    Posted 07-10-2018 06:15 AM

    @Salah

     

    be aware the operation is disruptive and any AG config will be lost.

     

    do follow:

     

    1)

     

    switchdisable

     

    2)

     

    ag --modedisable

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: This operation is not supported on this platform

    Posted 07-10-2018 06:31 AM

    Thank you for your reply.
    Yes, I have executed these commands but doesn't work

    Spoiler
    sw01:root> switchdisable
    sw01:root> ag --modeshow
    Access Gateway mode is enabled.
    sw01:root> ag --modedisable

    WARNING 1: Changing from Access Gateway mode to Switch mode will set zoning to "all access".

    WARNING 2: Disabling agmode will remove all the configuration data on the switch
    including N_Port configuration and F_Port to N_Port mapping. Please backup your
    configuration using configupload.

    This operation will reboot the switch.
    Do you want to continue? (yes, y, no, n): [no] yes
    This operation is not supported on this platform
    sw01:root>

    Thanks.


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: This operation is not supported on this platform

    Posted 07-10-2018 06:33 AM

    not as root.

     

    you must do a login as admin

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: This operation is not supported on this platform

    Posted 07-10-2018 06:48 AM
      |   view attached

    please i used admin with admin role but doesn't work, please which role i use ?

     

    Thank you.


    #BrocadeFibreChannelNetworkingCommunity


  • 6.  Re: This operation is not supported on this platform

    Posted 07-10-2018 06:53 AM

    @Salah

     

    no from a webtools

     

    log as admin in the command line

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 7.  Re: This operation is not supported on this platform

    Posted 07-10-2018 06:58 AM

    Yes, I use a command line.


    #BrocadeFibreChannelNetworkingCommunity


  • 8.  Re: This operation is not supported on this platform

    Posted 07-10-2018 07:05 AM

    you post a webtools screen!!! for that reason i say to use CLI

     

    again, do a login as "admin"

     

    then

     

    "switchdisable"

     

    "ag --modedisable"

     

    if this is not work, post the error output

     

    what is the FOS release ?

     

     

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 9.  Re: This operation is not supported on this platform

    Posted 07-10-2018 07:12 AM

    sw01:admin> switchdisable
    sw01:admin> ag --modedisable

    WARNING 1: Changing from Access Gateway mode to Switch mode will set zoning to "all access".

    WARNING 2: Disabling agmode will remove all the configuration data on the switch
    including N_Port configuration and F_Port to N_Port mapping. Please backup your
    configuration using configupload.

    This operation will reboot the switch.
    Do you want to continue? (yes, y, no, n): [no] yes
    This operation is not supported on this platform
    sw01:admin>

     

    and FOS release is 6.4.1a

     

    Thanks.

     


    #BrocadeFibreChannelNetworkingCommunity


  • 10.  Re: This operation is not supported on this platform

    Posted 07-10-2018 07:33 AM

    FOS 6.4 is indeed many years old, probable it was any bug / defect with this release.

     

    I send a message, please see you Private Message


    #BrocadeFibreChannelNetworkingCommunity


  • 11.  Re: This operation is not supported on this platform

    Posted 07-11-2018 03:43 PM

    It has been a long long time since I worked with AG mode switches, but I seem to recall that your issue could be a licensing issue.

     

    Can you post a licenseshow output? (I think a full fabric license may be required...)


    #BrocadeFibreChannelNetworkingCommunity