Brocade Fibre Channel Networking Community

Expand all | Collapse all

Snmp V3 (snmpadmin1 or snmpuser1) user password?

  • 1.  Snmp V3 (snmpadmin1 or snmpuser1) user password?

    Posted 09-05-2013 08:22 AM

    Hi Folk's

    How to set the authentication password  or Privilage Password for (snmpadmin1 or snmpuser1) snmp v3.

    Regards

    Seenivasan P


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Snmp V3 (snmpadmin1 or snmpuser1) user password?

    Posted 09-05-2013 08:59 AM

    help snmpconfig

    Or lookup the syntax in the command reference guide

    Its has many options. Depending on your desires you may need to execute a couple of times.

    For instance if you may want to block snmpv1/2c as you're using v3.


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Snmp V3 (snmpadmin1 or snmpuser1) user password?

    Posted 09-05-2013 09:37 AM

    As dion said . You can use snmpconfig. Here is little more detail.

    snmpconfig --set snmpv3  

    SNMP Informs Enabled (true, t, false, f):

    SNMPv3 user configuration(snmp user not configured in FOS user database will have physical AD and admin role as the default):

    User (rw):

    Auth Protocol : (1..3) 1

    New Auth Passwd: (authtest) 

    Verify Auth Passwd: (authtest)

    Priv Protocol ): (1..6) 1

    New Priv Passwd: (privtest)

    Verify Priv Passwd: (privtest)

    .......

    Similarly, you set the auth and priv passwd for snmpuser1.

    SNMPv3 trap recipient configuration:

    Trap Recipient's IP address :

    UserIndex: (1..6)

    Trap recipient Severity level : (0..5)

    Trap recipient Port : (0..65535)

    .......

    Done. 


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Snmp V3 (snmpadmin1 or snmpuser1) user password?

    Posted 09-05-2013 09:49 AM

    Hi Folk's

    Thanks for your assistance

    Can we configure snmp v2 on Brocade 300 switch FOS 7.1.0b?

    I hope we have only SNMP V1 and SNMP V3.

    If your have steps or any documents please let  me know.

    Regards

    Seenivasan P


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: Snmp V3 (snmpadmin1 or snmpuser1) user password?

    Posted 09-05-2013 09:57 AM

    I'm not sure and haven't bothered to look it up, but i believe setting option for v1 apply to v2c aswell.

    Any way the first hit here will provide a document and load more


    #BrocadeFibreChannelNetworkingCommunity