Brocade Fibre Channel Networking Community

Expand all | Collapse all

What is this "ag.port.nfporttopo"

Jump to Best Answer
  • 1.  What is this "ag.port.nfporttopo"

    Posted 10-20-2016 02:02 AM

    Hi,

     

    we have to San Directors and backuped the conifg. I have compared it and one one of the switches are these settings:

    ag.port.nfporttopo.0:0x0
    ag.port.nfporttopo.1:0x0
    ag.port.nfporttopo.10:0x0
    ag.port.nfporttopo.11:0x0
    ag.port.nfporttopo.12:0x0
    ag.port.nfporttopo.13:0x0
    ag.port.nfporttopo.14:0x0
    ag.port.nfporttopo.15:0x0
    ag.port.nfporttopo.16:0x0
    ag.port.nfporttopo.17:0x0
    ag.port.nfporttopo.18:0x0
    ag.port.nfporttopo.19:0x0
    ag.port.nfporttopo.2:0x0
    ag.port.nfporttopo.20:0x0
    ag.port.nfporttopo.21:0x0
    ag.port.nfporttopo.22:0x0
    ag.port.nfporttopo.23:0x0
    ag.port.nfporttopo.24:0x0
    ag.port.nfporttopo.25:0x0
    ag.port.nfporttopo.26:0x0
    ag.port.nfporttopo.27:0x0
    ag.port.nfporttopo.28:0x0
    ag.port.nfporttopo.29:0x0
    ag.port.nfporttopo.3:0x0
    ag.port.nfporttopo.30:0x0
    ag.port.nfporttopo.31:0x0
    ag.port.nfporttopo.32:0x0
    ag.port.nfporttopo.33:0x0
    ag.port.nfporttopo.34:0x0
    ag.port.nfporttopo.35:0x0
    ag.port.nfporttopo.36:0x0
    ag.port.nfporttopo.37:0x0
    ag.port.nfporttopo.38:0x0
    ag.port.nfporttopo.39:0x0
    ag.port.nfporttopo.4:0x0
    ag.port.nfporttopo.5:0x0
    ag.port.nfporttopo.6:0x0
    ag.port.nfporttopo.7:0x0
    ag.port.nfporttopo.8:0x0
    ag.port.nfporttopo.9:0x0

     

    What is this setting, and is it possible on the second one?

    Thanks


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: What is this "ag.port.nfporttopo"
    Best Answer

    Posted 10-20-2016 06:20 AM
    These entries are from the Access Gateway configuration. Director class switches are not allowed to run in the AG mode. Looking at the port numbers, most likely this director was sometimes configured using the backup config taken from 5100 switch. I hope it's safe to ignore these entries, and most likely the switch itself is ignoring them as well.
    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: What is this "ag.port.nfporttopo"

    Posted 10-21-2016 04:02 AM