Brocade Fibre Channel Networking Community

Expand all | Collapse all

I have a few FS8-18 warnings that concern me.

  • 1.  I have a few FS8-18 warnings that concern me.

    Posted 10-07-2016 12:46 PM

    I have a few FS8-18 warnings that concern me. I don't have much experience with this blade though. Looks to be running. I have a green light, shows enabled in slotshow and I can see the sfp's and blade info. Here are the warnings:

     

    2016/10/07-19:09:03, [SPC-2013], 371, SLOT 1 | FID 128, WARNING, AFX2515G013, S1, SP_MOD_SYSCTLD: Oscillator Failure Detected.

     2016/10/07-19:09:03, [SPC-2014], 372, SLOT 1 | FID 128, WARNING, AFX2515G013, S1, SP_MOD_SYSCTLD: Low Battery Level Detected.

     2016/10/07-19:12:27, [SPC-3010], 377, SLOT 1 | FID 128, WARNING, AFX2515G013, S1, SP_MOD_KPD: SEK integrity failure during initialization.

     

    This DCX is standalone at the moment and has nothing other then power and a serial cable connected. Any help would be appreciated. 


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: I have a few FS8-18 warnings that concern me.

    Posted 10-07-2016 08:27 PM

    @darrel.obbey

     

    here are several workaround how to solve the problem, I can try assist you to, however without any kind of warranty.

     

    you wrote:

     

    ->This DCX is standalone at the moment and has nothing....

     

    can you confirm the DCX is not in productive environments ?

     

    otherwise you should proceed with the Support and open a TAC.


    #BrocadeFibreChannelNetworkingCommunity