Brocade Fibre Channel Networking Community

Expand all | Collapse all

Is there a specific upgrade path from 7.0.x to 7.4.2c that has to be followed on a 5460.

  • 1.  Is there a specific upgrade path from 7.0.x to 7.4.2c that has to be followed on a 5460.

    Posted 04-03-2018 12:19 PM

    Just wondering if the image can be upgraded directly from 7.0.x to 7.4.2c directly if willing to do a disruptive upgrade, or if a specific path needs to be followed.  7.0---7.1---7.2 (from 7.2 it looks like no issue going to 7.4).

     

    Thank You


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Is there a specific upgrade path from 7.0.x to 7.4.2c that has to be followed on a 5460.

    Posted 04-03-2018 01:26 PM

    You'll have to look at each of the Release Notes to determine your upgrade path.

     

    I'd start by looking at the 7.2 as you should be able to jump from 7.0 to 7.2 disruptively, then 7.2 to 7.4.


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Is there a specific upgrade path from 7.0.x to 7.4.2c that has to be followed on a 5460.

    Posted 04-12-2018 07:33 AM

    Hello,

     

    Paths Non-Disruptively

     

    v7.0.x ===> v7.1.x
    v7.1.x ===> v7.2.x
    v7.2.x ===> v7.3.x
    v7.3.x ===> v7.4.2c

     

    Paths Disruptively

     

    v7.0.X ===> v7.2.x (Disruptively)
    v7.2.x ===> v7.3.x (Non-Disruptively)
    v7.3.x ===> v7.4.x (Non-Disruptively)


    v7.2.x ===> v7.4.2c is not supported

     

    For more detailed please read the release notes attached

     

    Regards


    #BrocadeFibreChannelNetworkingCommunity