Brocade Fibre Channel Networking Community

Expand all | Collapse all

bladeportmap output

  • 1.  bladeportmap output

    Posted 12-19-2014 01:32 AM

    Hi,

    does anybody know what the different column headers mean from the bladeportmap output?

     

    ------------------------------------------------------------------------------------------------------------------------------------------------------------------

     

    bladeportmap 1
    miniS=0 chips/Minis=1 bports/chip=40
    miniS=1 chips/Minis=1 bports/chip=40
    minis_count=2 chip_count=2 port_count=80

    CTL BPt UPt SPt MPt CPt IFi GPt M# C# Sw# G# ChID PBPt:ISL OID
    ================================================================================================
    ENB 0 -1 -1 0 0 6 0 0 0 -1 512 CONDOR2 5/124: 0x43128000
    ENB 1 -1 -1 1 1 5 1 0 0 -1 513 CONDOR2 8/124: 0x43128001
    ENB 2 -1 -1 2 2 5 2 0 0 -1 513 CONDOR2 8/125: 0x43128002

    .....

    .....

    .....

     

    ------------------------------------------------------------------------------------------------------------------------------------------------------------------

     

     

    I know that BPt is the number of the backend ports, but what do all the other column headers mean? I can't find an explanation either in WWW nor in a CMD reference.

     

    Thanks,

    Uwe

     


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: bladeportmap output

    Posted 03-14-2019 12:23 AM

    Conjecture from myself:

     CTL:portstatus

     BPt:Backend port

     UPt:Unique port(Index)

     SPt:Slot port(port number in slot)

     MPt & CPt: port number in ASIC

     IFi: NONE

     GPt:port group

     M# & C#:ASIC Number

     Sw#:bankend or external port

     G#:NONE

     ChID: ASIC type

     PBPt:ISL: Portmap Bankend between port-blade and CR-balde

     OID:NONE

     

    If have other or further conjecture , please told me

    Thanks

     

    Yulong from china


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: bladeportmap output

    Posted 03-14-2019 12:57 PM

    CTL Indicates whether the port is enabled (ENB) or disabled (DIS).

    BPt Blade port number. Blade ports can be internal or external.

    UPt User port number. These ports have external connections.

    SPt Slot port number.

    MPt Brocade internal use only.

    CPt Chip port number—the port number on the chip itself.

    IFi Interface index.

    GPt Brocade internal use only.

    M# Mini-switch number.

    C# Chip number within a blade.

    Sw# Brocade internal use only.

    G# Trunk group number.

    ChID ASIC type.

    PBPt:ISL Slot and port of the connected peer.


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: bladeportmap output

    Posted 03-15-2019 07:23 AM

    Brocade published a document in June 2014 called "Performance Issue Troubleshooting Guide" version 1.5

    that explains in detail the bladeportmap including the table headers.    The document as references

    Brocade Knowledge Base Article SLN1761 


    #BrocadeFibreChannelNetworkingCommunity