Brocade Fibre Channel Networking Community

Expand all | Collapse all

Hundreds of millions of enc_out errors per hour

  • 1.  Hundreds of millions of enc_out errors per hour

    Posted 03-04-2015 01:05 PM

    Greetings,

     

    Below is a porterrshow of a Brocade 300 switch that appears to be struggling to communicate on it's upstream ISL. We're getting latency bottleneck errors as well as link resets/credit loss events in the log. I've replaced the cable and SFP on this side of the switch and am wondering if there's something obvious I'm missing. I'm about to head over and replace the SFP and the cable on the datacenter side. 

     

    You're looking at about 2 hours of porterrshow data - I cleared the logs just a couple hours ago. Port 8 is the ISL with the 300 million enc out errors.

     

    Ideas?

     

    tx rx in err g_eof shrt long eof out c3 fail sync sig tx rx err
    0: 2.7g 2.2g 0 0 0 0 0 0 1.1k 0 0 2 3 0 0 0 0 0
    1: 246.8k 409.3k 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    2: 122.0k 278.3k 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    5: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    6: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    7: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    8: 195.4k 91.6k 595 475 396 4 0 79 342.2m 81 0 0 0 0 0 0 0 0
    9: 3.1g 2.7g 0 0 0 0 0 0 625 0 0 0 0 0 0 0 0 0
    10: 2.8g 3.2g 0 0 0 0 0 0 324 0 0 0 0 0 0 0 0 0
    11: 3.4g 216.0m 0 0 0 0 0 0 169 0 0 0 0 0 0 0 0 0
    12: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    13: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    14: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    15: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    16: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    17: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    18: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    19: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    20: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    21: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    22: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    23: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

     

    Note: it messed up my nice excel table - sorry for the horrible formatting.


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Hundreds of millions of enc_out errors per hour

    Posted 03-04-2015 01:41 PM

    Michael,

     

    1) replace the SFP on both side , and if is possible the cable

    2) if the error persist, open a call with you Supplier

     


    #BrocadeFibreChannelNetworkingCommunity