Brocade Fibre Channel Networking Community

Expand all | Collapse all

Factory reset to DS-4700M

  • 1.  Factory reset to DS-4700M

    Posted 12-10-2014 08:33 AM

    Hi,

     

    How can I do to factory reset an sw DS-4700 M?

     

    regards

     

    Pedro


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Factory reset to DS-4700M

    Posted 12-11-2014 12:42 AM

     hi there,

     

    The procedure is the following:

     

    - Set the switch offline.
    - At the EFCM Basic Edition interface, select Switch from the Maintenance menu at any view. 
    - Click Reset Configuration and OK to reset the configuration

     

    The IP Address should be changed to the defualt one, 10.1.1.10.

     

    Rgds,

    Felipon


    #BrocadeFibreChannelNetworkingCommunity
    #factoryreset
    #mcdata
    #4700


  • 3.  Re: Factory reset to DS-4700M

    Posted 12-15-2014 08:56 AM

    Hi Felipon,

     

    I cant connect to the console port, I need a special configuration cable?

     

    regards

     

    Pete


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Factory reset to DS-4700M

    Posted 12-15-2014 11:59 PM

    hi,

     

     

    The cable for DS-4700M is the following:

     

    Null modem cable — An asynchronous RS-232 null modem cable is required to configure product network addresses and acquire event log information through the product’s serial port. The cable has nine conductors and DB-9 female connectors.

     

    And the port settings parameters to configure:

     

    • Bits per second—57600
    • Data bits—8
    • Parity—None
    • Stop bits—1
    • Flow control—Hardware or None

     

    Rgds,

    Felipon


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: Factory reset to DS-4700M

    Posted 12-16-2014 06:53 AM