Brocade Fibre Channel Networking Community

Expand all | Collapse all

portDisableReason: Fabric Login failed zero/duplicate AL_PA

  • 1.  portDisableReason: Fabric Login failed zero/duplicate AL_PA

    Posted 04-10-2014 09:19 AM

    Hi,

     

    I am configuring an HP C7000 with Brocade B-series 8/24c SAN switch to "talk" with a Brocade 300 switch

     

    I setup the module in the AG mode and 2 out of the 3 host blades have been mapped correctly. The 3rd one though has port disabled "portDisableReason: Fabric Login failed zero/duplicate AL_PA"

     

    All host blades are identical / used QLOGIC HBA

     

    Any help/ suggestions would be greatly appreciated 

     

    Here are some details:

     

     

    ag --show
    Name : bs03a-sw02
    NodeName : 10:00:00:05:33:4a:5f:d5
    Number of Ports : 24
    IP Address(es) : 10.10.18.25
    Firmware Version : v6.3.1c
    N_Ports : 2
    F_Ports : 0
    Policies enabled : pg
    Persistent ALPA : Disabled
    Port Group information :
    PG_ID PG_Members PG_Name PG_Mode
    ----------------------------------------------------------------------------------------
    0 0;17;18;19;20; pg0 -
    21;22;23
    ----------------------------------------------------------------------------------------
    Fabric Information :
    Attached Fabric Name N_Ports
    ---------------------------------------------
    10:00:50:eb:1a:05:57:bd 17
    10:00:50:eb:1a:05:bc:62 18
    ---------------------------------------------
    N_Port information :
    Port PortID Attached PWWN FO FB IP_Addr F_Ports
    ---------------------------------------------------------------------
    17 0x010000 20:00:50:eb:1a:05:57:bd 1 1 10.x.x.x 1;2;
    18 0x010000 20:00:50:eb:1a:05:bc:62 1 1 10.x.x.x  None
    ---------------------------------------------------------------------
    F_Port information :
    Port PortID Attached PWWN N_Port Preferred N_port Login Exceeded?
    ------------------------------------------------------------------------------------
    None

     

    ag --mapshow
    N_Port Configured_F_Ports Current_F_Ports Failover Failback PG_ID PG_Name
    --------------------------------------------------------------------------------
    0 15;16 None 1 1 0 pg0
    17 1;2 1;2 1 1 0 pg0
    18 9;10 None 1 1 0 pg0

     

    switchshow
    switchName: bs03a-sw02
    switchType: 72.3
    switchState: Online
    switchMode: Access Gateway Mode
    switchWwn: 10:00:00:05:33:4a:5f:d5
    switchBeacon: OFF

    Index Port Address Media Speed State Proto
    ==============================================
    0 0 010000 -- N8 No_Module FC
    1 1 010100 cu N8 Online FC G-Port
    2 2 010200 cu N8 Online FC G-Port
    3 3 010300 cu AN No_Sync FC Disabled (Persistent)
    4 4 010400 cu AN No_Sync FC Disabled (Persistent)
    5 5 010500 cu AN No_Sync FC Disabled (Persistent)
    6 6 010600 cu AN No_Sync FC Disabled (Persistent)
    7 7 010700 cu AN No_Sync FC Disabled (Persistent)
    8 8 010800 cu AN No_Sync FC Disabled (Persistent)
    9 9 010900 cu AN No_Sync FC Disabled (Fabric Login failed zero/duplicate AL_PA)
    10 10 010a00 cu AN No_Sync FC Disabled (Persistent)
    11 11 010b00 cu AN No_Sync FC Disabled (Persistent)
    12 12 010c00 cu AN No_Sync FC Disabled (Persistent)
    13 13 010d00 cu AN No_Sync FC Disabled (Persistent)
    14 14 010e00 cu AN No_Sync FC Disabled (Persistent)
    15 15 010f00 cu AN No_Sync FC Disabled (Persistent)
    16 16 011000 cu AN No_Sync FC Disabled (Persistent)
    17 17 011100 id N8 Online FC N-Port 10:00:50:eb:1a:05:57:bd 0x010000
    18 18 011200 id N8 Online FC N-Port 10:00:50:eb:1a:05:bc:62 0x010000


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: portDisableReason: Fabric Login failed zero/duplicate AL_PA

    Posted 04-10-2014 10:54 AM

    what happens if you run portenable 9


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: portDisableReason: Fabric Login failed zero/duplicate AL_PA