Brocade Fibre Channel Networking Community

Expand all | Collapse all

S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

  • 1.  S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

    Posted 09-23-2013 05:12 AM

    We are seeing the following error/warning on our DS5300 switch:

    S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

    S0,C0: Internal link errors have been reported, no hardware faults identified, continuing to monitor for errors: fault1:17, fau

    We are running code v6.3.1a.  Would updating the OS possibly resolve the issue?  Is it safe to update the OS when the above is triggering?

    Thanks in advance.


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

    Posted 09-23-2013 10:52 AM

    It's clearly something inside the box, perhaps fixed by an update perhaps not.

    I these errors continue to pop up I would log a call with (OEM vendor) support to get to the bottom of this.

    Have supportsaves ready for them


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2