Brocade Fibre Channel Networking Community

Expand all | Collapse all

Can not use ping command for FOS 3.2.1b

  • 1.  Can not use ping command for FOS 3.2.1b

    Posted 10-21-2015 09:43 PM

    Hi

     

    Can not work ping command for FOS 3.2.1b, How to use Ping Command switch to server.

     

    Model :- 3534-F08

    fabric os :- 3.2.1b

     

    Thank you

     

    Asanka Sanjeewa


    #BrocadeFibreChannelNetworkingCommunity
    #AntonioBongiornoTechHelp24
    #TechHelp24


  • 2.  Re: Can not use ping command for FOS 3.2.1b

    Posted 10-21-2015 10:27 PM

    Not sure what you want to/or mean with "ping" ????

     

    This Plattforms and FOS is no longer supported, if you want to ping the FC port, as fair as I remember, the command "fcping" was not supported in FOS 3.x

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Can not use ping command for FOS 3.2.1b

    Posted 10-21-2015 11:28 PM

     

    Hi Antonio

     

    Thanks for your reply

     

    I want to ping Fiber switch to destination server ip.

     

    I tried fcping and ping commands.

     

    ex:- fcping 192.168.100.7

     

    Thank you

     

    Asanka Sanjeewa

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Can not use ping command for FOS 3.2.1b

    Posted 10-21-2015 11:42 PM

    I believe you confuse FC technology with IP technology.

     

    from FC Switches Port you cannot Ping the Server IP or another IP Connected Devices.

     

    again, first at all, fcping command is on this plattform and FOS release not supported, second you cannot send any ping request from FC port to any IP addressed device.


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: Can not use ping command for FOS 3.2.1b

    Posted 10-22-2015 01:06 AM
    :) Hi Antonio Thank you for the support Regards Asanka Sanjeewa
    #BrocadeFibreChannelNetworkingCommunity


  • 6.  Re: Can not use ping command for FOS 3.2.1b

    Posted 10-21-2015 11:16 PM

    Try with the command "fcpprobeshow"

    for details/operands refer the Command Reference Manuals


    #BrocadeFibreChannelNetworkingCommunity