Brocade Fibre Channel Networking Community

Expand all | Collapse all

SNMP setting in Brocade Switches

Jump to Best Answer
  • 1.  SNMP setting in Brocade Switches

    Posted 06-22-2015 06:54 AM

    Hello Everyone,

     

     I have to configure snmp setting in our environment for all SAN switches.

    We have Brocade 5300 and DCX4 in our environment. Is there any brocade document which will cover all the steps for snmp configuration.

    If anyone has any doc please share it with me.


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: SNMP setting in Brocade Switches
    Best Answer

    Posted 06-22-2015 10:58 AM

     

    Refer FOS_CmdRef_v6.x OR v7.x. Manual.

     

    snmpConfig
    Manages the SNMP agent configuration.
    Synopsis snmpConfig --show | --set | --default [snmpv1 | snmpv3 | accessControl | mibCapability |
    systemGroup | seclevel]
    snmpConfig --set mibCapability [-mib_name mib_name [ -bitmask bit_mask]]
    snmpConfig --enable |--disable mibCapability --mib_name mib_name [-trap_name trap_name]
    snmpConfig --help


    #BrocadeFibreChannelNetworkingCommunity