Brocade Fibre Channel Networking Community

Expand all | Collapse all

Forget to convert the fabric Watch to MAPS.

  • 1.  Forget to convert the fabric Watch to MAPS.

    Posted 10-29-2015 06:28 AM

    Hi,

     

     we need to convert the fabric wat to MAPS before upgrade the FOS to 7.4.x.  now, customer forget to convert the fabric to MAPS. They cannot use the email alert and fabric watch on FOS7.4

     

    Do you have any recommend, how to monitor, set the alert same like fabric watch

     

     

    Many Thanks,

     


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Forget to convert the fabric Watch to MAPS.

    Posted 10-29-2015 07:46 AM

    Hi,

     

    --->>>.....customer forget to convert the fabric to MAPS. They cannot use the email alert and fabric watch on FOS7.4

     

    convert FW config to MAPS bevore upgrade is recommended but not mandatory.

     

    the convert features is just as for convenience, instead to recreate all of the thresholds and rules.

     

    In you case if the email alert is not work properly, you have here 100% a mismatch config and this have nothing to do if you convert FW or no.

     

    I would suggest to review the MAPS Admin Guide and to check the Switch configuration.

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Forget to convert the fabric Watch to MAPS.

    Posted 10-29-2015 08:20 PM

    Hi Antonio, 

     

    Thank you very much for your suggestion. I will check with customer about MAPS admin Guide and check switch configuration.


    #BrocadeFibreChannelNetworkingCommunity