Brocade Fibre Channel Networking Community

Expand all | Collapse all

How to setup a brocade 300 switch

  • 1.  How to setup a brocade 300 switch

    Posted 05-28-2013 05:10 AM

    Hi,

    We are going to configure brocade 300 switch in our environmental . We are having VMware servers and we didn't have director fabric . we have to connect from hba to brocade 300 and from there to Dell storage . So my question is that we have to go with full fabric switch or access gate switch configuration . We can have NVIP port in full fabric switch also ??? -- raki


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: How to setup a brocade 300 switch

    Posted 05-28-2013 06:11 AM

    Hi,

    If that brocade 300 will be the only switch in the fabric, then you should go with full switch fabric. And yes, NPIV is active by default.

    Rgds,

    Felipon


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: How to setup a brocade 300 switch

    Posted 05-28-2013 06:32 AM

    Felipon,

    Can you provide the configuration steps to configure this switch.

    Raki


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: How to setup a brocade 300 switch

    Posted 05-29-2013 06:42 AM

    Hi Raki,

    please look in the FOS Administrator Guide.

    Download the Guide for your Firmware from brocade.com.

    Regards

    Ralf


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: How to setup a brocade 300 switch

    Posted 05-29-2013 08:43 AM