Brocade Fibre Channel Networking Community

Expand all | Collapse all

port trap generated but no entry in "fabriclog"

  • 1.  port trap generated but no entry in "fabriclog"

    Posted 11-15-2013 02:06 AM

    I have the following issue:

    event trap (incident) is generated for a certain port but when checking in the RAS log with "fabriclog" command there is on entry for this same port;

     

    P.S: I can provide more info with exact dates & time of occurence

     

    Regards,

    Kiril


    #BrocadeFibreChannelNetworkingCommunity
    #RASlog
    #monitoring
    #traps


  • 2.  Re: port trap generated but no entry in "fabriclog"

    Posted 11-18-2013 07:50 AM

    Hi,

     

    If the link failures are caused by NPIV devices not directly connected to that port, a link failure would be reported in errdump and BNA master log but no event would be recorded in fabriclog. Is that your case?

     

    If you paste the output of the logs you have and the location of the affected ports, we will try to give you a hand.

     

    Rgds,

    Felipon


    #BrocadeFibreChannelNetworkingCommunity