Brocade Fibre Channel Networking Community

Expand all | Collapse all

Brocade Port reporting Loss Sync & Link Fail after removing a Blade from IBM Blade Center.

  • 1.  Brocade Port reporting Loss Sync & Link Fail after removing a Blade from IBM Blade Center.

    Posted 07-08-2014 02:25 PM

    Both on port 8 where I have powered down a blade as well as on port 10 where I removed a blade

    the ports are reporting Loss Sync. Is this normal? Do I need to reset something on the Brocade so

    that it understands the port is no longer being used?


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Brocade Port reporting Loss Sync & Link Fail after removing a Blade from IBM Blade Center.

    Posted 07-17-2014 04:59 AM

    everytime i see this post, i ask myself if the op is trying us or if he is serious about this/his question


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Brocade Port reporting Loss Sync & Link Fail after removing a Blade from IBM Blade Center.

    Posted 07-17-2014 05:00 AM

    everytime i see this post, i wonder if the op is trying us?!


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Brocade Port reporting Loss Sync & Link Fail after removing a Blade from IBM Blade Center.

    Posted 07-22-2014 05:29 AM

    Hi,

     

    nothing needs to be done, the switch is working and reporting what is detects as expected.

     

    rgds


    #BrocadeFibreChannelNetworkingCommunity