Brocade Fibre Channel Networking Community

What is the proper way to add or remove HBA/storage connections using Brocade EZSwitchSetup wizard ?

  • 1.  What is the proper way to add or remove HBA/storage connections using Brocade EZSwitchSetup wizard ?

    Posted 10-02-2014 01:21 PM

    Hello experts,

     

    I will be adding a new EMC VNX5100 Dual SP FC Array to an existing VMware Cluster consisting of:

     

    ==================================================

    - 3x VMware ESXi 5.1 hosts. Each hosts is equipped with 2x Emulex LPe1150 4Gb FC HBAs

    - 1x Fujitsu ETERNUS Dual SP FC Array

    - 2x Brocade 300 SAN Switches configured in Typical Zoning mode using EZSwitchSetup wizard

    ==================================================

    Based on my understanding, EZSwitchSetup wizard allows me to change this initial configuration later if I need to add or remove HBA/storage connections.

    What is the proper way of doing this?

    Any help would be greatly appreciated.

     

    Thanks and Regards,

     

    Massimiliano


    #BrocadeFibreChannelNetworkingCommunity