Brocade Fibre Channel Networking Community

Expand all | Collapse all

Cannot log with GUI

  • 1.  Cannot log with GUI

    Posted 03-18-2016 03:01 AM

    Hi Team

     

    Cannot log with GUI via ip addres and cannot ping the switch ip FOS,

    once time I change the ip address then try to login switch but not working,

    please advice me how to resove this issue.

     

    FOS v 6.4

     

    Asanka Sanjeewa


    #BrocadeFibreChannelNetworkingCommunity
    #san
    #AntonioBongiornoTechHelp24
    #storagenetworking
    #fibrechannel


  • 2.  Re: Cannot log with GUI

    Posted 03-18-2016 03:16 AM

    If you don't know the IP addres, then use the serial console and execute the command "ipaddrshow"


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Cannot log with GUI

    Posted 03-18-2016 03:20 AM

    I know the ip address, but my problem is cant access the ip address


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Cannot log with GUI

    Posted 03-18-2016 03:24 AM

    ->I know the ip address, but my problem is cant access the ip address

     

    are you sure ????

     

    check the Ethernet Cable, if necessary replace the cable.

    check the Eth Switch port where the Brocade is connected

     

    is probable you have made the change but not config the new IP ?

     

    If the cable is ok, you have no other way as to connect trough the serial port and verify the settings.


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: Cannot log with GUI

    Posted 03-18-2016 03:47 AM

    last time I checked all you mention activities, and loged via serial cable then change the ip address but not reloved my problem


    #BrocadeFibreChannelNetworkingCommunity


  • 6.  Re: Cannot log with GUI

    Posted 03-18-2016 03:56 AM

    switch type / model ?

     

    fos release installed ?

     

    connect via serial port and post output and screen-shot of follow command

     

    "ifmodeshow"

     

    additional check if any policy is configured

     

    "ipfilter"


    #BrocadeFibreChannelNetworkingCommunity