Brocade Fibre Channel Networking Community

XTUN-1999 FTRACE buffer 3 has been triggered

  • 1.  XTUN-1999 FTRACE buffer 3 has been triggered

    Posted 06-04-2013 04:09 PM

    We're running a number Brocade 7800s at FOS 6.4.2a

    Periodically we're getting the above warning messages which are being trapped by our SNMP monitoring environment.

    reading around the issue and trawlin t'internet, all I can find is:

    Message

     

        

    Probable Cause

     

    Indicates that a programmed trigger event has been detected.

        

    Recommended Action

    If there was an unexpected job failure associated with this event, contact your vendor's customer support for assistance.

        

    Severity

     

    WARNING

    So not much use at all really?!?!?!

    I'm trying to determine what might be causing this and what I can do to stop these alerts beings generated. A quick check across all 8 of our 7800s shows there appears once every couple of days.


    #BrocadeFibreChannelNetworkingCommunity