I needed to delete and reset all configuration for a pair of IO SAN Switch -- Brocade 20-port 8Gb SAN Switch Module for IBM BladeCenter (44X1926 FRU) -- the thing is I reset the module to default settings as I done it in the past with multiple switch.... it boots OK well or at least looks like
but when loging with admin - user - root - factory user I get message " [: =: unary operator expected "
something interesting is I see in the login "Switch_Name:AD:>" instead of user name it says AD normally it should be "Switch_Name:UserName:>" for example "Switch_Name:admin:>" also when executing help command I get this, not matter which user I use to to run help command
helpError in rbac help. rc = -7No commands are available to this user.
and last when I run a normal command line switchshow or others I get this
"RBAC permission denied"
GUI won't load it shows this
Cannot load RBACMatrix from switch: Cannot get RBAC Matrix from DAO
no idea whats going on here
any idea guys?
thanks a lot
well there was telnet connectivity so looks like the issue was GUI and ssh... I was in a let's say no privileged shs mode on the other hand telnet was working OK
took me some time to know telnet worked as well for this switch :womanlol: