Brocade Fibre Channel Networking Community

Expand all | Collapse all

b6505 base model with one PS/fan shows alarm in webtool

  • 1.  b6505 base model with one PS/fan shows alarm in webtool

    Posted 08-18-2015 12:45 PM

    B6505 base model with one ps/fan shows alarm in web tool , goes off if i insert the second one . Is there brocade document confirming this ?  FOS is 7.4.0a , so here we have default MAPS policy enabled and the rule to check this ps/fan checking and setting the switch status to marginal . IS there a way to edit or modify this default maps policy / rule .

     

    Any help will be appreciated .

     

     

    Raj


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: b6505 base model with one PS/fan shows alarm in webtool

    Posted 08-19-2015 05:01 AM
    from what i know, you cannot edit default policies. what you should do is to create a copy of the default policy, modify this copy and apply it to the switch.
    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: b6505 base model with one PS/fan shows alarm in webtool

    Posted 10-26-2015 07:46 PM

    Yes, you have to clone the default policy and edit the cloned policy. Afterward, you can activate the cloned policy. But you need a policy to do that.


    #BrocadeFibreChannelNetworkingCommunity