Brocade Fibre Channel Networking Community

Expand all | Collapse all

The Syslog destination table is full on the switch,

  • 1.  The Syslog destination table is full on the switch,

    Posted 03-15-2015 03:49 AM

    How do you fix this issue?

     

    "Registering Server x.x.x.240 as Syslog recipient to the switch x.x.x.131 failed. Reason: The Syslog destination table is full on the switch,13,"",x.x.x.131,None,x:00:00:x:x:14:2B:81,"",Unknown,2015-03-12 x:x:x.x,2015-03-12 x:x:x.941,-1,0,0,0,"","",,,,,0,"",""

     


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: The Syslog destination table is full on the switch,

    Posted 03-24-2015 09:57 AM

    Hi,

     

    Check the content of the syslog destination table by executing the following command:

     

    SWITCH:admin> syslogdipshow
    syslog.1 10.64.160.156
    syslog.2 10.64.161.106
    syslog.3 10.64.160.247
    syslog.4 192.168.163.234
    syslog.5 192.168.163.235
    syslog.6 192.168.163.236

     

    The maximun number of syslog destinations is 6, so if you reached that limit, you have to remove a destionation prior to adding a new one. To remove one of the above syslog destinations, perform the following:

     

    SWITCH:admin> syslogdipremove 192.168.163.234
    Syslog IP address 192.168.163.234 removed

     

    Best regards,

    Felipon

     

     


    #BrocadeFibreChannelNetworkingCommunity