Brocade Fibre Channel Networking Community

Expand all | Collapse all

is there a way to audit operations performed via Webtools?

  • 1.  is there a way to audit operations performed via Webtools?

    Posted 06-25-2013 06:27 AM

    Hi there,

    with command clihistory we can audit the last commands executed via CLI, but is there a equivalent log/command to audit the operations performed via webtools?

    Cheers,

    Felipon


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: is there a way to audit operations performed via Webtools?

    Posted 06-25-2013 02:04 PM

    Hi filipon.  Hmmmm... I don't think so, but let me go knock on some doors and find out for sure.

    More to follow sir...


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: is there a way to audit operations performed via Webtools?

    Posted 07-09-2013 10:36 AM

    Sorry for the delay Felipon.  Here is what we got back from engineering...

    "We don’t have an exact mapping as CLI history command but the operations that we performed from WT switch Admin will be tracked in the bottom of the switch Admin dialog.so if the customer uses WT do all the configuration changes then this should address his requirement."

    eng.png

    "In WT we don’t have an option to filter audit logs based on the event classes. From CLI we have to enable the filter for specific event classes and in WT we can just add the syslog server (switch Admin to Network tab) to receive the filtered log."


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: is there a way to audit operations performed via Webtools?

    Posted 07-09-2013 01:29 PM

    Thank you very much for the answer Mike.


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: is there a way to audit operations performed via Webtools?

    Posted 07-09-2013 03:10 PM