I am in need of unconfiguring ISL Connections. I have 2 fabrics, in each fabric I have 1 6505 and 1 G620. Ports 0/4 are being used on the 6505 SAN and Ports 19/23 are used on the G620 SAN. I would like to remove the 6505 from the fabric. What steps would I take to accomplish this?
Thanks so much for any info that can be provided..
The command is "portcfgeport 0/4 0" will disable the port 0/4 from becoming an E port(ISL). To reverse this use the same command with a 1 at the end to enable the port as an E port again.
See the FOS command reference for full explanation.