Brocade Fibre Channel Networking Community

Expand all | Collapse all

problem in zoning log I need help

Jump to Best Answer
  • 1.  problem in zoning log I need help

    Posted 11-03-2013 05:30 AM

    I have a brocade switch 4100 with O.S 5.2.0a

    when I collect supportshow & supportsave 

    I get the following 


    Switch Health Report Report time: 11/03/2013 12:50:14 PM
    Switch Name: S1
    IP address:
    SwitchState: HEALTHY
    Duration: 963:37

    Power supplies monitor HEALTHY
    Temperatures monitor HEALTHY
    Fans monitor HEALTHY
    Flash monitor HEALTHY
    Marginal ports monitor HEALTHY
    Faulty ports monitor HEALTHY
    Missing SFPs monitor HEALTHY

    All ports are healthy

    switchName: S1
    switchType: 32.0
    switchState: Online
    switchMode: Native
    switchRole: Subordinate
    switchDomain: 11
    switchId: fffc0b
    switchWwn: 10:00:00:05:1e:03:f5:02
    zoning: OFF
    switchBeacon: OFF


    and show analysis

    Effective Configuration Warnings Zoning is OFF on this switch
    But when I use "switchshow"
    and "cfgactvshow"
    it shows that there are an active zone already running 
    I need your help as soon as possible 



  • 2.  Re: problem in zoning log I need help

    Posted 11-07-2013 07:12 AM

    Have you tried enabling a zone configuration again?



  • 3.  Re: problem in zoning log I need help
    Best Answer

    Posted 11-18-2013 08:01 AM



    If you the switch is working without issues, that may just be a cosmetic issue. The FOS release is veeery old, so and upgrade would be a good choice.