Brocade Fibre Channel Networking Community

Expand all | Collapse all

ezswitchsetup

Jump to Best Answer
  • 1.  ezswitchsetup

    Posted 04-18-2019 04:56 AM

    Good Morning, I recently configured a new 6510 switch using ezswitch. I got through the setup but when attempting to IE into the switch instead of opening up the Webtools initial switch interface it opens ezswitch dialog box where the new password should be entered. I cancelled out and retried but same results, I've even tried to change the password but it won't accept a new password. I can putty into the switch using the admin password and would be able to complete adding zones via putty but I would prefer to set the zones up using webtools. Thanks for your time.


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: ezswitchsetup

    Posted 04-18-2019 05:07 AM

    Additionally I've uninstalled the ezswitch app and still the dialog box comes up.


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: ezswitchsetup
    Best Answer

    Posted 04-18-2019 06:01 AM

    Hello,

     

    go to switch via ssh,

     

    type configure

    for webtools attributes type yes

    press Enter untill you get: Basic User Enabled

     

     

    If its Yes the EZswitch manager will be default instead of web gui.

     

    Basic User Enabled (yes, y, no, n): [yes] y

     

    If you will type NO. Web tools should launch nstead of  EZswitch manager 

     

    Basic User Enabled (yes, y, no, n): [yes] No

     


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: ezswitchsetup

    Posted 04-18-2019 06:17 AM