Brocade Fibre Channel Networking Community

Expand all | Collapse all

VE port segmented (zone conflict)

  • 1.  VE port segmented (zone conflict)

    Posted 01-16-2013 06:48 AM

    Hello,

    We have FCIP configured between Brocade DCX and 7500 Extension switch. We recently had a power outage and since then the 7500 is throwing error regarding the VE port being segmented. I checked the output of command 'defzone --show' which turns out to be as below;

    B7500-RT:maintadmin> defzone --show

    Default Zone Access Mode

            committed - All Access

            transaction - No Transaction

    B7500-RT:maintadmin>

    Also the port is in online status but segmented. Kindly advise if any solution for the same.

    Thanks,

    Karan


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: VE port segmented (zone conflict)

    Posted 01-22-2013 03:52 AM

    Hi,

    Please check active zoning in both ends, maybe, during the power outage a zone change was performed.


    #BrocadeFibreChannelNetworkingCommunity