Brocade Fibre Channel Networking Community

Expand all | Collapse all

Issue about HFBR-57E0ALZ

  • 1.  Issue about HFBR-57E0ALZ

    Posted 04-27-2018 12:30 AM

    1. Does this SFP module - HFBR-57E0ALZ can work normally without using EEPROM interface, in another word, does the SFP module need to configured before it can works?

    1. What is the EEPROM address for the I2C interface, is it read only or not?
    2. How about the SFP AFCT-5705Z?  I have the same two questions as above.

    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Issue about HFBR-57E0ALZ

    Posted 04-27-2018 01:19 AM

    @will.cui

     

    where you want to use those SFP's ?

     

    Switch Type ? FOS Release ?

     

    apart on that, since Gen4 Switches only genuine Labelled Brocade SFP are supported and certified, excepted WDM SFP.


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Issue about HFBR-57E0ALZ

    Posted 04-27-2018 06:53 PM

    Hi, we don't use the Switch,  the SFP is installed on our module,  the communication is point to point .

    My question is "do we need to configure the SFP module using I2C interface?  If yes,  what's the I2C device address for these modules? "


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: Issue about HFBR-57E0ALZ

    Posted 04-27-2018 07:18 PM

    @will.cui

     

    you are here with you question totally wrong, this community support FC Switches and it's related SFP.

     

    And I don't know what kind for module you talk about.


    #BrocadeFibreChannelNetworkingCommunity