Brocade Fibre Channel Networking Community

Expand all | Collapse all

Can't upgrade from 7.3.2a to 7.4.1c, always get error message.

  • 1.  Can't upgrade from 7.3.2a to 7.4.1c, always get error message.

    Posted 09-13-2016 01:04 AM

    Hey guys,

    i am upgrade the FOS from 7.3.2a to 7.4.1c, but when i do the upgrade(either upgrade localy or from BNA), i ways got the error message as below:

    Checking system settings for firmwaredownload...
    The following item(s) need to be addressed before downloading the specified firmware:
    Advanced Performance Monitoring (APM) is obsoleted in FOS v7.4. Please remove all APM monitors if installed on all the logical switches prior to upgrade. Please use commands perfDelEEMonitor, fmMonitor --delmonitor, perfTTmon --delete to remove all End-to-End monitors, Frame monitors and Top talker monitors respectively. Flow Vision provides the same functionality in FOS v7.4. Please refer Flow Vision Administrator's guide for further information.

    Firmwaredownload failed.

     

    i tried to run the command and checked, i have no user defined monitors. and also i checked the method below.

    any one have idea on this? 

     

     

    http://www.brocade.com/content/html/en/administration-guide/fos-740-flow/GUID-5C81FAE6-449C-440C-AA8F-05705D9FF51D.html 


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Can't upgrade from 7.3.2a to 7.4.1c, always get error message.

    Posted 09-13-2016 01:29 AM

    @popo_magic

     

    Are you running Virtual Fabrics (VF) (fosconfig --show), then you need to verify in all logical switches that APM monitors are removed - notice that toptalker also installed monitor.  Further, please provide output from the following command:

     

    configshow -all | grep perf.Toptalker

     

     


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: Can't upgrade from 7.3.2a to 7.4.1c, always get error message.

    Posted 09-14-2016 02:50 AM

    Hi,

     

    please provide the output from following commands:

     

    perfresourceshow –eeRes

     

    perfresourceshow --portttRes

     


    #BrocadeFibreChannelNetworkingCommunity