Brocade Fibre Channel Networking Community

Expand all | Collapse all

Can I configure SNMPv1 in a Virtual Fabric?

  • 1.  Can I configure SNMPv1 in a Virtual Fabric?

    Posted 02-05-2013 11:23 AM

    Hello All,

    I'm configuring a Brocade DCX with Virtual Fabric and SNMPv1 and can not see the ports in the SNMP server (CA Spectrum).
    Question: Is it possible to configure SNMPv1 with Virtual Fabric enviroment?

    Thanks.

    Alvaro Luna


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: Can I configure SNMPv1 in a Virtual Fabric?

    Posted 02-06-2013 03:17 AM

    Hi,

    Yes, there should not be any problem in configuring it. Check The MIBs installed in the snmp server in case there could be a missing one.

    With the following commands you cna check the current snmp settings on the switchs.

    snmpconfig --show snmpv1

    snmpconfig --show accesscontrol

    snmpconfig --show mibcapability

    rgds


    #BrocadeFibreChannelNetworkingCommunity