Brocade Fibre Channel Networking Community

Expand all | Collapse all

7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

  • 1.  7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

    Posted 11-13-2015 05:13 AM

    Hi , does anyone know which combination of MAPSrules and values are usable for BRCD6505 with only one Power Supply.

    It seem that after update to 7.4.0a a mapspolicy for a switch with two power supplys is enabled.

    All predefined policys are configured with the same values.

     

    defCHASSISBAD_PWR_MARG                  |CHASSIS(BAD_PWR/NONE>=1)                          |SW_MARGINAL,SNMP,EMAIL     |
    defCHASSISBAD_PWR_CRIT                  |CHASSIS(BAD_PWR/NONE>=2)                          |SW_CRITICAL,SNMP,EMAIL     |
    defCHASSISBAD_FAN_MARG                  |CHASSIS(BAD_FAN/NONE>=1)                          |SW_MARGINAL,SNMP,EMAIL     |
    defCHASSISBAD_FAN_CRIT                  |CHASSIS(BAD_FAN/NONE>=2)                          |SW_CRITICAL,SNMP,EMAIL     |

     

    regards

    Lutz


    #mapspolicy
    #storagenetworking
    #7.4.0
    #powersupply
    #san
    #fibrechannel
    #BrocadeFibreChannelNetworkingCommunity
    #mapsrule


  • 2.  Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

    Posted 11-13-2015 07:26 AM
    As already discussed: clone one of the policies, modify your new copy and activate it.
    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

    Posted 11-15-2015 11:10 PM

    Hi Alexey ,

    thx for your response but my question is regarding to the correct values.

    The default values and rules are for a switch with two power supplies.

    We have only one power supplie , so it indicates a marginal warning.

     

    What I wnat is to suppress the warning for the missing power supplie and fan.

     

    regards Lutz


    #BrocadeFibreChannelNetworkingCommunity


  • 4.  Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

    Posted 11-15-2015 11:28 PM

    Lutz,

     

    Forgot and ignore all the post here in the community about this error message in Brocade 6505.

     

     

    Symptom : MAPS indicates the switch state is marginal if only one power supply unit is present on Brocade 6505.  
    Conditions : This is only applicable to Brocade 6505 switch.  
    Workaround : This erroneous message may be ignored.

     

    This is a Defect000564334  and there - AFAIK - is no workaround today.

     

    The defect will be closed in coming next Release.


    #BrocadeFibreChannelNetworkingCommunity


  • 5.  Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

    Posted 05-30-2016 08:17 AM

    Hi,

     

    Do we have a Document with this information? i'm having the same problem.


    #BrocadeFibreChannelNetworkingCommunity


  • 6.  Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

    Posted 05-30-2016 08:24 AM
      |   view attached

    The DEFECT as be reported with FOS 7.4.1a

     

     


    #BrocadeFibreChannelNetworkingCommunity

    Attachment(s)