20210927/114821.473 - U00003400 Server 'AE12#WP' version '12.3.6+hf.2.build.1628160621897' (changelist '1628081214') started. 20210927/114821.473 - U00003327 Build Date: '2021-08-05', '13:14:30' 20210927/114821.473 - U00003433 Server was started with INI file './ucsrv.ini'. 20210927/114821.473 - ---------------------------------------------------------------------------------------------------- 20210927/114821.473 - ; 20210927/114821.473 - ; Automic Configuration File for Automation Engine 20210927/114821.473 - ; 20210927/114821.473 - 20210927/114821.473 - key=./ucsrv_key.pem 20210927/114821.473 - chain= 20210927/114821.473 - [GLOBAL] 20210927/114821.473 - ; 20210927/114821.473 - ; system: AE system name 20210927/114821.473 - ; The name can consist of a maximum of 8 characters. Allowed are the upper-case letters A to Z, numbers and "_". 20210927/114821.473 - ; 20210927/114821.473 - system=AE12 20210927/114821.473 - ; 20210927/114821.473 - ; language: The Language(s) in which the log messages are displayed.Always a pair of languages separated by comma enclosed in brackets. 20210927/114821.473 - ; if a message text is not available in the primary language the secondary language will be taken. 20210927/114821.473 - ; E - english 20210927/114821.473 - ; D - german 20210927/114821.473 - ; F - french 20210927/114821.473 - ; 20210927/114821.473 - language=(E,D) 20210927/114821.473 - ; 20210927/114821.473 - ; logging: Full file name pattern for log file names 20210927/114821.473 - ; $$ is replaced by the purpose of a Process (CP or WP or JWP or DBSERVICE). No replacements in other components 20210927/114821.473 - ; * is replaced by the 3 digit number of a Worker Process. 20210927/114821.473 - ; ## is replaced by the log file sequence number after the existing log files' corresponding numbers have been raised by one during startup of the component. 20210927/114821.473 - ; z/OS components only: 20210927/114821.473 - ; If you comment this parameter, this log file is stored in JES. Also refer to the parameter logpurgeclass= which is described below. 20210927/114821.473 - ; The following parameters can be added if the log is written to a dataset (after the dataset name and separated by semicolons): 20210927/114821.473 - ; "recfm" = (all 27 z/OS plus * and A record formats are valid) 20210927/114821.473 - ; "lrecl" = (0, each positive number up to 32760 and X for each reclen) 20210927/114821.473 - ; "blksize" = (0, each positive number up to 32760) 20210927/114821.473 - ; "space" = ([CYL,TRK],(prim,sec,directory)) 20210927/114821.473 - ; 20210927/114821.473 - logging=../temp/$$srv_log_*_##.txt 20210927/114821.473 - ; 20210927/114821.473 - ; logCount: number of log files being kept on disk 20210927/114821.473 - ; 20210927/114821.473 - logCount=10 20210927/114821.473 - ; 20210927/114821.473 - ; helplib: name of the message text library 20210927/114821.473 - ; 20210927/114821.473 - helplib=uc.msl 20210927/114821.473 - ; 20210927/114821.473 - ; helpcache: Availability of the messages and language dependent strings. 20210927/114821.473 - ; ALL - The complete message file is held in the RAM. 20210927/114821.473 - ; NONE - Always read from the hard drive. 20210927/114821.473 - ; CONTROLS - All language dependant strings that are necessary in order to display the dialog program are held in the RAM (not relevant for the Automation Engine). 20210927/114821.473 - ; 20210927/114821.473 - helpcache=ALL 20210927/114821.473 - ; 20210927/114821.473 - ; startMode: Automation Engine system startup mode. 20210927/114821.473 - ; NORMAL - Normal AE start 20210927/114821.473 - ; COLD - AE cold start. All task queues are cleared. 20210927/114821.473 - ; 20210927/114821.473 - startMode=COLD 20210927/114821.473 - ; 20210927/114821.473 - ; snmp: SNMP connection. 20210927/114821.473 - ; 0 - No SNMP connection. 20210927/114821.473 - ; 1 - SNMP connection is active. 20210927/114821.473 - ; 2 - SNMP connection is active. SNMP Traps are additionally logged in the Windows Event Viewer. 20210927/114821.473 - ; 20210927/114821.473 - snmp=0 20210927/114821.473 - ; 20210927/114821.473 - ; nodename: The description of the dialog process environment. 20210927/114821.473 - ; 20210927/114821.473 - nodename=uc4_1 20210927/114821.473 - ; 20210927/114821.473 - ; primaryMode: The mode of the primary work process (PWP). 20210927/114821.473 - ; The primary work process serves to process special messages. 20210927/114821.473 - ; This parameter can be used to specify whether it should also serve as normal work process. 20210927/114821.473 - ; 1 - The PWP processes only own messages. This is only possible if a further work process is active. 20210927/114821.473 - ; 0 - The PWP also processes messages which can generally be processed by work processes. 20210927/114821.473 - ; 20210927/114821.473 - primaryMode=1 20210927/114821.473 - ; 20210927/114821.473 - ; exception: Exception handling. 20210927/114821.473 - ; With this option being activated, messages that caused a server process crash are intercepted and moved to quarantine. Doing so protects your AE system because intercepted messages will not affect further worker processes. 20210927/114821.473 - ; 0 - exception handler turned off 20210927/114821.473 - ; 1 - exception handler tuned on 20210927/114821.473 - ; 20210927/114821.473 - exception=1 20210927/114821.473 - ; 20210927/114821.473 - ; systemStop: Client handling after Server-process start. 20210927/114821.473 - ; NORMAL - Client status remains unchanged. 20210927/114821.473 - ; YES - All clients are stopped after Server-process start. 20210927/114821.473 - ; 20210927/114821.473 - systemStop=NORMAL 20210927/114821.473 - 20210927/114821.473 - [CPMsgTypes] 20210927/114821.473 - ; 20210927/114821.473 - ; srvquery: Determines which process responds to the agent's life sign message 20210927/114821.473 - ; This setting has a performance impact. If the CP layer responds than the workload is distributed as agents are connected to different CP's whereas only one Primary WP exists in a system. Furthermore there is no need to hand over the agent's life sign messages to the PWP via the message queue tables which safes database IO's 20210927/114821.473 - ; 0 - The primary work process (PWP) responds to the agent's live sign messages. (Slower) 20210927/114821.473 - ; 1 - The communication processes (CPs) respond to the agent's live sign messages. (Faster) 20210927/114821.473 - ; 20210927/114821.473 - srvquery=0 20210927/114821.473 - 20210927/114821.473 - [CACHE] 20210927/114821.473 - ; 20210927/114821.474 - ; script: The maximum cache size (bytes) for script. 20210927/114821.474 - ; 20210927/114821.474 - script=3000000 20210927/114821.474 - ; 20210927/114821.474 - ; vara: The maximum cache size (bytes) for variables. 20210927/114821.474 - ; 20210927/114821.474 - vara=3000000 20210927/114821.474 - ; 20210927/114821.474 - ; mqmem: The maximum cache size (in bytes) for the mqmem table records. 20210927/114821.474 - ; 20210927/114821.474 - mqmem=3000000 20210927/114821.474 - 20210927/114821.474 - [TRACE] 20210927/114821.474 - ; 20210927/114821.474 - ; file: The path and the file name of the trace file. 20210927/114821.474 - ; Any file name for a text file with several place holders for current system information: 20210927/114821.474 - ; $$ is replaced by server process type (WP or CP) in the context of a server process. 20210927/114821.474 - ; * is replaced by the three-digit process number in the context of a server process. 20210927/114821.474 - ; ## is replaced by 00 after the available trace files' corresponding numbers have been raised by one during startup of a trace. 20210927/114821.474 - ; xxx is replaced by the three-digit abbreviation of the respective unix version (unix agent only). 20210927/114821.474 - ; z/OS components only: 20210927/114821.474 - ; The following parameters can be added (after the dataset name and separated by semicolons) if the log is written to a dataset: 20210927/114821.474 - ; "recfm" = (all 27 record formats of z/OS plus * and A are valid) 20210927/114821.474 - ; "lrecl" = (0, each positive number up to 32760 and X for each reclen) 20210927/114821.474 - ; "blksize" = (0, each positive number up to 32760) 20210927/114821.474 - ; "space" = ([CYL,TRK],(prim,sec,directory)) 20210927/114821.474 - ; 20210927/114821.474 - file=../temp/$$srv_trc_*_##.txt 20210927/114821.474 - ; 20210927/114821.474 - ; trccount: Number of stored trace files 20210927/114821.474 - ; 20210927/114821.474 - trccount=10 20210927/114821.474 - ; 20210927/114821.474 - ; tcp/ip: traceflag 20210927/114821.474 - ; 20210927/114821.474 - tcp/ip=0 20210927/114821.474 - ; 20210927/114821.474 - ; database: traceflags 20210927/114821.474 - ; 0 - no trace 20210927/114821.474 - ; 1 - SQL 20210927/114821.474 - ; 2 - OPC 20210927/114821.474 - ; 3 - Bind parameters 20210927/114821.474 - ; 4 - Data fields 20210927/114821.474 - ; 20210927/114821.474 - database=0 20210927/114821.474 - ; 20210927/114821.474 - ; trc03: traceflag 20210927/114821.474 - ; 20210927/114821.474 - trc03=0 20210927/114821.474 - ; 20210927/114821.474 - ; srcall: traceflag 20210927/114821.474 - ; 20210927/114821.474 - srcall=0 20210927/114821.474 - ; 20210927/114821.474 - ; memio: traceflag 20210927/114821.474 - ; 20210927/114821.474 - memio=0 20210927/114821.474 - ; 20210927/114821.474 - ; jcl: traceflag 20210927/114821.474 - ; 20210927/114821.474 - jcl=0 20210927/114821.474 - ; 20210927/114821.474 - ; memsv: traceflag 20210927/114821.474 - ; 20210927/114821.474 - memsv=0 20210927/114821.474 - ; 20210927/114821.474 - ; snmp: traceflag 20210927/114821.474 - ; 20210927/114821.474 - snmp=0 20210927/114821.474 - ; 20210927/114821.474 - ; zuxml: traceflag 20210927/114821.474 - ; 20210927/114821.474 - zuxml=0 20210927/114821.474 - ; 20210927/114821.474 - ; cache: traceflag 20210927/114821.474 - ; 20210927/114821.474 - cache=0 20210927/114821.474 - ; 20210927/114821.474 - ; trc11: traceflag 20210927/114821.474 - ; 20210927/114821.474 - trc11=0 20210927/114821.474 - ; 20210927/114821.474 - ; ucds: traceflag 20210927/114821.474 - ; 20210927/114821.474 - ucds=0 20210927/114821.474 - ; 20210927/114821.474 - ; xscript: traceflag 20210927/114821.474 - ; 20210927/114821.474 - xscript=0 20210927/114821.474 - ; 20210927/114821.474 - ; uc4global: traceflag 20210927/114821.474 - ; 20210927/114821.474 - uc4global=0 20210927/114821.474 - ; 20210927/114821.474 - ; trc15: traceflag 20210927/114821.474 - ; 20210927/114821.474 - trc15=0 20210927/114821.474 - ; 20210927/114821.474 - ; trc16: traceflag 20210927/114821.474 - ; 20210927/114821.474 - trc16=0 20210927/114821.474 - ; 20210927/114821.474 - ; memtrace: traceflag 20210927/114821.474 - ; 0 - This setting enables writing into the file when a WP starts. 20210927/114821.474 - ; 1 - This setting enables writing into the memory when a WP starts. 20210927/114821.474 - ; 20210927/114821.474 - memtrace=0 20210927/114821.474 - 20210927/114821.474 - [TCP/IP] 20210927/114821.474 - ; 20210927/114821.474 - ; aliveTimeout: The duration in seconds in which the AE.Nonstop-Server expects a message from the primary work process. 20210927/114821.474 - ; If this time span is exceeded, the AE.Nonstop-Server becomes the primary work process. 20210927/114821.474 - ; 20210927/114821.474 - aliveTimeout=600 20210927/114821.474 - ; 20210927/114821.474 - ; bindAddr: IP address the component uses to connect. 20210927/114821.474 - ; Use this parameter if the connection should be established via a particular IP address (for example, the computer has more than one network interface card). 20210927/114821.474 - ; 20210927/114821.474 - ;bindAddr=111.1.1.1 20210927/114821.474 - ; 20210927/114821.475 - ; bindLocal: Consideration of local host 127.0.0.1 (IPv4) or ::1 (IPv6). 20210927/114821.475 - ; Use this parameter together with bindAddr=. This setting is ignored if bindAddr is not set. 20210927/114821.475 - ; 0 - No listen socket is created. 20210927/114821.475 - ; 1 - An additional listen socket is created on the local host. 20210927/114821.475 - ; 20210927/114821.475 - ;bindLocal=1 20210927/114821.475 - ; 20210927/114821.475 - ; chiffre: Encryption for transfer. 20210927/114821.475 - ; 0 - Non-encrypted transfer. 20210927/114821.475 - ; 1 - Transfers are encrypted. 20210927/114821.475 - ; 20210927/114821.475 - ;chiffre=1 20210927/114821.475 - ; 20210927/114821.475 - ; connect: The time interval in seconds for the reestablishment of connections after a loss of connection. 20210927/114821.475 - ; 20210927/114821.475 - ; For the Automation Engine: reconnect between Server Processes 20210927/114821.475 - ; For Agents: reconnect to the Engine 20210927/114821.475 - ; For the zOS Event Monitor: reconnect to the Agent 20210927/114821.475 - ; For the Proxy: reconnect to Automation Engine or Server Proxy 20210927/114821.475 - ; 20210927/114821.475 - connect=120 20210927/114821.475 - ; 20210927/114821.475 - ; hostName: If you use this parameter, the UserInterfaces, CallAPIS and agents receive the information about the CPs that are known in the system via host name and port and not via the IP address and port during the CP selection phase while the connection to the Automation Engine is being established. In doing so, you can avoid firewall and other NATproblems. 20210927/114821.475 - ; Set hostname=*OWN if you want the operating system to retrieve the host name on which the CP is running. 20210927/114821.475 - ; 20210927/114821.475 - ;hostName= 20210927/114821.475 - ; 20210927/114821.475 - ; listenQueue: The maximum number of login requests in the list queue. 20210927/114821.475 - ; 20210927/114821.475 - listenQueue=2030 20210927/114821.475 - ; 20210927/114821.475 - ; maxMsgSize: Maximum length of messages (in bytes) that a CP (Server communication process) or an Agent accepts in Bytes. 20210927/114821.475 - ; 20210927/114821.475 - maxMsgSize=31457280 20210927/114821.475 - ; 20210927/114821.475 - ; netarea: The name of the net area of the server processes 20210927/114821.475 - ; Default value: Name of the AE system 20210927/114821.475 - ; This value affects the CP selection of components such as agents. For more detailed information about this parameter, see chapter Net Areas in AE. 20210927/114821.475 - ; 20210927/114821.475 - ;netarea= 20210927/114821.475 - ; 20210927/114821.475 - ; pwpPort: The port number of the primary work process. 20210927/114821.475 - ; 20210927/114821.475 - pwpPort=2270 20210927/114821.475 - ; 20210927/114821.475 - ; report: The time interval in seconds in which an Agent sends or the Automation Engine saves the logging to the database. 20210927/114821.475 - ; 20210927/114821.475 - report=60 20210927/114821.475 - ; 20210927/114821.475 - ; retryWait: The time intervals in seconds during which the server processes attempt to get a free port number from the port list in [PORTS] section. 20210927/114821.475 - ; Format: (number, interval) 20210927/114821.475 - ; number = Maximum number of attempts that should be made in order to obtain a free port from the port list. 20210927/114821.475 - ; interval = Waiting period in seconds between attempts. 20210927/114821.475 - ; 20210927/114821.475 - retryWait=(3,10) 20210927/114821.475 - ; 20210927/114821.475 - ; retryWaitPwp: This parameter is exclusively used by work processes. 20210927/114821.475 - ; They cyclically try to connect to primary-work-process port at system start or when the connection has been lost. 20210927/114821.475 - ; Format: (number, interval) 20210927/114821.475 - ; 20210927/114821.475 - retryWaitPwp=(3,10) 20210927/114821.475 - ; 20210927/114821.475 - ; sendBufferSize: The size of the TCP/IP input buffer for the messages that should be sent (in bytes). 20210927/114821.475 - ; The default value that depends on the system environment is used when you do not define this setting or when you define the value 0. 20210927/114821.475 - ; 20210927/114821.475 - sendBufferSize=1024k 20210927/114821.475 - ; 20210927/114821.475 - ; recvBufferSize: The size of the TCP/IP input buffer for the message that should be received (in bytes). 20210927/114821.475 - ; The default value that depends on the system environment is used when you do not define this setting or when you define the value 0. 20210927/114821.475 - ; 20210927/114821.475 - recvBufferSize=1024k 20210927/114821.475 - ; 20210927/114821.475 - ; serverConnectionVerify: This checks whether the TCP/IP connection with a partner has been entered in the AE database table MQSRV and whether the IP address specified in the database complies with this connection's IP address. 20210927/114821.475 - ; Activate this setting if the server should reject connections where the IP addresses do not match. 20210927/114821.475 - ; 0 - The TCP/IP connection and the IP address are not checked. 20210927/114821.475 - ; 1 - Activates the query. 20210927/114821.475 - ; 20210927/114821.475 - serverConnectionVerify=0 20210927/114821.475 - ; 20210927/114821.475 - ; snmp: The port number that the Automation Engine uses in order to connect to the AE SNMP Subagent. 20210927/114821.475 - ; 20210927/114821.475 - snmp= 20210927/114821.475 - ; 20210927/114821.475 - ; snmpReconnect: The interval in seconds that the system needs in order to reconnect to the AE SNMP Subagent after a connection loss. 20210927/114821.475 - ; 20210927/114821.475 - snmpReconnect=500 20210927/114821.475 - ; 20210927/114821.475 - ; tcp_KeepAlive_Time: The time interval in seconds in which keep-alive packets are sent in order to keep connections. 20210927/114821.475 - ; The default value that depends on the system environment is used when you do not define this setting or when you define the value 0. 20210927/114821.475 - ; 20210927/114821.475 - tcp_KeepAlive_Time=6600 20210927/114821.475 - ; 20210927/114821.475 - ; tcp_Nodelay: This defines the use of the Nagle algorithm for the connections of the Automation Engine. 20210927/114821.475 - ; 0 - Activates Nagle algorithm on all sockets. 20210927/114821.475 - ; 1 - Deactivates the Nagle algorithm on all sockets. 20210927/114821.475 - ; 20210927/114821.475 - tcp_Nodelay=1 20210927/114821.475 - 20210927/114821.475 - [PORTS] 20210927/114821.475 - ; 20210927/114821.475 - ; CP.PORTS: List of semicolon-separated ports or a range of ports to which CPs will bind. CPs bind in the order as listed. 20210927/114821.475 - ; A range can be specified with a dash (-) in between a starting and an ending port. 20210927/114821.475 - ; The port numbers within an AE system must be unique, even if the system is distributed over several computers. 20210927/114821.475 - ; 20210927/114821.475 - CP.PORTS=2217-2221 20210927/114821.475 - ; 20210927/114821.475 - ; JCP.PORTS: List of semicolon-separated ports or a range of ports to which JCPs will bind. JCPs bind in the order as listed. 20210927/114821.475 - ; Use this setting if you do not want JCPs to automatically bind to random ports. 20210927/114821.475 - ; A range can be specified with a dash (-) in between a starting and an ending port. 20210927/114821.475 - ; The port numbers within an AE system must be unique, even if the system is distributed over several computers. 20210927/114821.475 - ; 20210927/114821.475 - ;JCP.PORTS=2317 20210927/114821.475 - ; 20210927/114821.476 - ; JWP.SYNC.PORTS: List of semicolon-separated ports or ranges of ports on which JWPs will listen for incoming connections from WPs. JWPs bind in the order as listed. 20210927/114821.476 - ; Use this setting if you do not want JWPs to automatically bind to random ports. 20210927/114821.476 - ; A range can be specified with a dash (-) in between a starting and an ending port. 20210927/114821.476 - ; 20210927/114821.476 - ;JWP.SYNC.PORTS=2271-2279 20210927/114821.476 - 20210927/114821.476 - [DB_SERVICE] 20210927/114821.476 - ; 20210927/114821.476 - ; cp: Address of the AE system's communication process to which the agent should connect. 20210927/114821.476 - ; Allowed formats: 20210927/114821.476 - ; DNS name:port number 20210927/114821.476 - ; TCP/IP address:port number 20210927/114821.476 - ; 20210927/114821.476 - cp=localhost:2217 20210927/114821.476 - ; 20210927/114821.476 - ; name: Name of the database agent that should be used to resolve variables. 20210927/114821.476 - ; The name of the agent computer (host name) is used if nothing has been defined. 20210927/114821.476 - ; The agent name is limited to 32 characters. The following characters are allowed: A-Z, 0-9, $, @, _, -, . 20210927/114821.476 - ; A hyphen ( "-") can be used for the agent name in the configuration file for reasons of compatibility to former Automation Engine versions. Newly created agents must not include hyphens in their names. 20210927/114821.476 - ; 20210927/114821.476 - name= 20210927/114821.476 - ; 20210927/114821.476 - ; tcp/ip: traceflag 20210927/114821.476 - ; 20210927/114821.476 - tcp/ip=0 20210927/114821.476 - ; 20210927/114821.476 - ; initialPackage: Path and name of the file that contains the authentication package. 20210927/114821.476 - ; When it starts, the agent reads this file and stores the information it includes in the file specified in the parameter KeyStore=. The original file is then deleted. 20210927/114821.476 - ; 20210927/114821.476 - initialPackage= 20210927/114821.476 - ; 20210927/114821.476 - ; keyStore: Path and name of the file that contains information about the authentication package (see InitialPackage=). 20210927/114821.476 - ; 20210927/114821.476 - keyStore=KStore.ini 20210927/114821.476 - ; 20210927/114821.476 - ; connect: Time interval in seconds in which the agent attempts to establish connection to the Automation Engines. This affects the connection setup for a restart or after a lost connection. 20210927/114821.476 - ; 20210927/114821.476 - connect=60 20210927/114821.476 - ; 20210927/114821.476 - ; retention_time: Number of seconds after which an unused database connection should be terminated. 20210927/114821.476 - ; 20210927/114821.476 - retention_time=60 20210927/114821.476 - ; 20210927/114821.476 - ; retry: Number of connection attempts to the database. 20210927/114821.476 - ; 20210927/114821.476 - ; The number that is specified in this parameter determines how often the agent attempts to connect to the database. After the nth failed attempt, the job ends with status ENDED_NOT_OK. 20210927/114821.476 - ; 20210927/114821.476 - ; The agent continues to connect to the database if this parameter has not been specified in the INI file. The job remains active until the database is available again or until it is canceled. 20210927/114821.476 - ; 20210927/114821.476 - retry=10 20210927/114821.476 - ; 20210927/114821.476 - ; optimize: Database optimization. 20210927/114821.476 - ; Optimization means, that if you select data with a key, the db-service automatically optimizes the query to a new statement where the given key is part of the statement. If the query does not return any data or results in an error, the original query is executed. 20210927/114821.476 - ; 0 - Database optimization off. 20210927/114821.476 - ; 1 - Database optimization on. 20210927/114821.476 - ; 20210927/114821.476 - optimize=1 20210927/114821.476 - 20210927/114821.476 - [ODBC] 20210927/114821.476 - ; 20210927/114821.476 - ; sqlDriverConnect: Connection String for the database. 20210927/114821.476 - ; General format of the connection string is "OBDCVAR=," 20210927/114821.476 - ; 20210927/114821.476 - ; is an eight figure command field for controlling database accesses like follows 20210927/114821.476 - ; 1. Position = N - Do not use server cursor. 20210927/114821.476 - ; 1. Position = S - Use server cursor (MS SQL Server 2000). 20210927/114821.476 - ; 2. Position = N - Do not reestablish database connection after 1000 commits. 20210927/114821.476 - ; 2. Position = D - Disconnect database after 1000 commits (perhaps due to memory problems). 20210927/114821.476 - ; 3. Position = N - Field names are compared case-sensitively (Oracle). 20210927/114821.476 - ; 3. Position = J - Field names are compared case-insensitively (Oracle). 20210927/114821.476 - ; 4. Position = N - Not used. 20210927/114821.476 - ; 5. Position = N - Type of database connection: ODBC. 20210927/114821.476 - ; 5. Position = I - Type of database connection: OCI/CLI. 20210927/114821.476 - ; 6. Position = N - Database access without User ID. 20210927/114821.476 - ; 6. Position = O - Database access with User ID. 20210927/114821.476 - ; 7. Position = N - Compression is deactivated. 20210927/114821.476 - ; 7. Position = R - Compression is activated. 20210927/114821.476 - ; 8. Position = Type of SQL Syntax; N - MS SQL Server. 20210927/114821.476 - ; 8. Position = Type of SQL Syntax; O - Oracle. 20210927/114821.476 - ; 8. Position = Type of SQL Syntax; D - DB2. 20210927/114821.476 - ; 8. Position = Type of SQL Syntax; P - PostgreSQL. 20210927/114821.476 - ; 20210927/114821.476 - ; contains standard and vendor related keywords and values 20210927/114821.476 - ; DSN - Alias name of the database connection. 20210927/114821.476 - ; UID - User ID for database access. Note that this parameter is case sensitive. 20210927/114821.476 - ; PWD - Password for database access. 20210927/114821.476 - ; ODBCVAR=NNNNNNRN,DSN=UC4;UID=uc4;PWD=???;Mars_Connection=Yes - Microsoft SQL Server with MARS 20210927/114821.476 - ; ODBCVAR=SNNNNNRN,DSN=UC4;UID=uc4;PWD=??? 20210927/114821.476 - ; ODBCVAR=NNJNIORO,DSN=UC4;UID=uc4;PWD=???;SP=NLS_LANGUAGE=AMERICAN,NLS_TERRITORY=AMERICA,CODESET=WE8ISO8859P15 - Oracle 20210927/114821.476 - ; ODBCVAR=NNJNIORP,host=localhost port=5432 dbname=UC4 user=UC4 password=??? connect_timeout=10 client_encoding=LATIN9 - PostgreSQL 20210927/114821.476 - ; 20210927/114821.476 - ;sqlDriverConnect=ODBCVAR=SNNNNNRN,DSN=UC4;UID=uc4;PWD=??? 20210927/114821.476 - sqlDriverConnect=ODBCVAR=NNJNIORO,DSN=REBTEST6;UID=UC4;PWD=???;SP=NLS_LANGUAGE=AMERICAN,NLS_TERRITORY=AMERICA,CODESET=WE8ISO8859P1 20210927/114821.476 - 20210927/114821.476 - [JDBC] 20210927/114821.476 - ; 20210927/114821.476 - ; sqlDriverConnect: The JDBC connection string to connect JAVA based worker processes (JWP) to the database. 20210927/114821.476 - ; jdbc:sqlserver://localhost:1433;databaseName=AUTOMIC - MS SQL Server 20210927/114821.476 - ; jdbc:db2://localhost:50000/AUTOMIC - DB2 20210927/114821.476 - ; jdbc:oracle:thin:@//localhost:1521/AUTOMIC - ORACLE 20210927/114821.476 - ; jdbc:postgresql://localhost:5432/AUTOMIC - PostgreSQL 20210927/114821.476 - ; 20210927/114821.476 - sqlDriverConnect=jdbc:oracle:thin:@//bdpmidesgen86:1521/REBTEST6 20210927/114821.476 - 20210927/114821.476 - [JWP] 20210927/114821.476 - ; 20210927/114821.476 - ; allowDbTracing: By default, JWP will ignore the traceflag set for database operations for performance resons. Set this to "0" to explicitly disable db-tracing according to DATABASE traceflag. 20210927/114821.476 - ; 0 - Database operations will never write to tracefile, even when enabled using traceflags. 20210927/114821.476 - ; 1 - Database operations will write to tracefile when and how it is configured in traceflags. 20210927/114821.476 - ; 20210927/114821.476 - ;allowDbTracing=1 20210927/114821.477 - ; 20210927/114821.477 - ; libpath: Semicolon separated list of directories where to look for optional external 3rd party libraries. Configure this with path to CyberArk SDK library if you want to enable CyberArk integration. 20210927/114821.477 - ; 20210927/114821.477 - ;libpath= 20210927/114821.477 - 20210927/114821.477 - [REST] 20210927/114821.477 - ; 20210927/114821.477 - ; host: Hostname where the REST API will be reachable from external. Configure this when using an SSL Termination proxy. 20210927/114821.477 - ; 20210927/114821.477 - ;host= 20210927/114821.477 - ; 20210927/114821.477 - ; port: Port where the REST API will accept HTTP/HTTPS requests 20210927/114821.477 - ; 20210927/114821.477 - port=8088 20210927/114821.477 - ; 20210927/114821.477 - ; sslEnabled: Defines if HTTP or HTTPS will be used 20210927/114821.477 - ; 0 - HTTP will be used 20210927/114821.477 - ; 1 - HTTPS will be used 20210927/114821.477 - ; 20210927/114821.477 - sslEnabled=0 20210927/114821.477 - ; 20210927/114821.477 - ; keystore: Path and file where the keystore for the SSL certificate is stored 20210927/114821.477 - ; 20210927/114821.477 - keystore=./httpsKeyfile 20210927/114821.477 - ; 20210927/114821.477 - ; keystorePassword: Password of the keystore File 20210927/114821.477 - ; 20210927/114821.477 - keystorePassword=??? 20210927/114821.477 - ; 20210927/114821.477 - ; keyPassword: Password for the Keys protection 20210927/114821.477 - ; 20210927/114821.477 - keyPassword=??? 20210927/114821.477 - ; 20210927/114821.477 - ; parallelDbConnections: The maximal number of parallel connections to the database so requests can be processed at the same time 20210927/114821.477 - ; 1..99 - Number of parallel connections 20210927/114821.477 - ; 20210927/114821.477 - parallelDbConnections=5 20210927/114821.477 - ; 20210927/114821.477 - ; sessionTimeout: Session timeout in seconds, if a session is not used within this time span the AE user session is closed 20210927/114821.477 - ; 2..2147483648 - seconds (maxvalue 2^31) 20210927/114821.477 - ; 20210927/114821.477 - sessionTimeout=120 20210927/114821.477 - ; 20210927/114821.477 - ; corsSupportEnabled: Enable or disable the Access-Control-Allow-Origin response header configured with CORSACCESSCONTROLALLOWORIGIN, more details: https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS. 20210927/114821.477 - ; 0 - CORS requests are not allowed 20210927/114821.477 - ; 1 - CORS requests are allowed 20210927/114821.477 - ; 20210927/114821.477 - corsSupportEnabled=0 20210927/114821.477 - ; 20210927/114821.477 - ; corsAccessControlAllowOrigin: This sets the The Access-Control-Allow-Origin response header which indicates whether the response can be shared with resources with the given origin. If multiple origins are allowed, they must be separated with char ','. Use char '*' if all origins should be allowed. 20210927/114821.477 - ; 20210927/114821.477 - corsAccessControlAllowOrigin=* 20210927/114821.477 - ; 20210927/114821.477 - ; gzipSupportEnabled: Enable GZIP compression for REST API responses. 20210927/114821.477 - ; 0 - gzip support is disabled 20210927/114821.477 - ; 1 - gzip support is enabled 20210927/114821.477 - ; 20210927/114821.477 - gzipSupportEnabled=0 20210927/114821.477 - ; 20210927/114821.477 - ; minPoolSize: Minimum number of threads waiting for incoming requests, raise this if you expect multiple parallel requests to maximize the response time. 20210927/114821.477 - ; 20210927/114821.477 - minPoolSize=8 20210927/114821.477 - ; 20210927/114821.477 - ; maxPoolSize: Maximum number of threads waiting for incoming requests. 20210927/114821.477 - ; 20210927/114821.477 - maxPoolSize=200 20210927/114821.477 - ; 20210927/114821.477 - ; idleTimeout: Set the maximum idle time for threads in the thread pool. Threads that are idle for longer than this period may be stopped. 20210927/114821.477 - ; 20210927/114821.477 - idleTimeout=60000 20210927/114821.477 - 20210927/114821.477 - [OBJECTSEARCH] 20210927/114821.477 - ; 20210927/114821.477 - ; index.cache.folder: Path to the folder where the search index wil be stored. 20210927/114821.477 - ; 20210927/114821.477 - index.cache.folder=indexCache 20210927/114821.477 - ; 20210927/114821.477 - ; update.batch.size: Amount of objects that get indexed simultaneously 20210927/114821.477 - ; 20210927/114821.477 - update.batch.size=1000 20210927/114821.477 - 20210927/114821.477 - [CAPKI] 20210927/114821.477 - ; 20210927/114821.477 - ; certificate: Path to the file where the certificate is stored 20210927/114821.477 - ; 20210927/114821.477 - ;certificate= 20210927/114821.477 - ; 20210927/114821.477 - ; key: Path to the file containing the private key 20210927/114821.477 - ; 20210927/114821.477 - ;key= 20210927/114821.477 - ; 20210927/114821.477 - ; chain: Some certificates may require an intermediate certificate for validation if the signing certificate authority is not trusted directly. The location of the intermediate certificate can be set here. 20210927/114821.477 - ; 20210927/114821.477 - ;chain= 20210927/114821.477 - ; 20210927/114821.477 - ; trusted_cert_folder: Path to the trusted certificate files 20210927/114821.477 - ; 20210927/114821.477 - ;trusted_cert_folder= 20210927/114821.477 - certificate=./ucsrv_certificate.pem 20210927/114821.477 - ---------------------------------------------------------------------------------------------------- 20210927/114821.478 - U00003492 Server has been started on Host 'sapmiintuc410.riu.net' ('192.168.252.14') with process ID '18848'. 20210927/114821.479 - U00003395 Operating system 'Linux' version '2.6.32-754.27.1.el6.x86_64' (build information '2021-08-05 13:14:30 - l64a1'). 20210927/114821.479 - U00003328 The computer has '4' CPUs and '15934M' memory. 20210927/114821.481 - core file size (blocks, -c) 0 20210927/114821.481 - data seg size (kbytes, -d) unlimited 20210927/114821.481 - scheduling priority (-e) 0 20210927/114821.481 - file size (blocks, -f) unlimited 20210927/114821.481 - pending signals (-i) 63636 20210927/114821.481 - max locked memory (kbytes, -l) 64 20210927/114821.481 - max memory size (kbytes, -m) unlimited 20210927/114821.481 - open files (-n) 1024 20210927/114821.481 - pipe size (512 bytes, -p) 8 20210927/114821.481 - POSIX message queues (bytes, -q) 819200 20210927/114821.481 - real-time priority (-r) 0 20210927/114821.481 - stack size (kbytes, -s) 10240 20210927/114821.481 - cpu time (seconds, -t) unlimited 20210927/114821.481 - max user processes (-u) 1024 20210927/114821.481 - virtual memory (kbytes, -v) unlimited 20210927/114821.481 - file locks (-x) unlimited 20210927/114821.481 - U00003409 'UC_PCX' memory successfully allocated (address = '0x14ecbb0', length = '8192/8k'). 20210927/114821.481 - U00003409 'UC_IO' memory successfully allocated (address = '0x19c8c90', length = '65536/64k'). 20210927/114821.481 - U00003409 'UC_MQ' memory successfully allocated (address = '0x19d8ca0', length = '65536/64k'). 20210927/114821.482 - U00003403 Server routine 'UCMAIN_R' was found at address '0x410628'. 20210927/114821.482 - U00003403 Server routine 'UCREPRTR' was found at address '0x410f68'. 20210927/114821.482 - U00003403 Server routine 'UCVAREXR' was found at address '0x410318'. 20210927/114821.482 - U00003403 Server routine 'UCUSER_R' was found at address '0x40ff58'. 20210927/114821.482 - U00003403 Server routine 'JPAKTJ_R' was found at address '0x410cb8'. 20210927/114821.482 - U00003403 Server routine 'UCFCST_R' was found at address '0x410da8'. 20210927/114821.482 - U00003403 Server routine 'JPEXEC_R' was found at address '0x410a28'. 20210927/114821.482 - U00003403 Server routine 'UCDS_R' was found at address '0x410fb8'. 20210927/114821.482 - U00003403 Server routine 'UCGENX_R' was found at address '0x410a88'. 20210927/114821.482 - U00003403 Server routine 'UCPRMPTR' was found at address '0x410838'. 20210927/114821.482 - U00003403 Server routine 'UCDVAR_R' was found at address '0x40fe68'. 20210927/114821.487 - U00003409 'WORK' memory successfully allocated (address = '0x7fad44fa9010', length = '2004064/1957k'). 20210927/114821.489 - U00003409 'LOCAL' memory successfully allocated (address = '0x7fad44980010', length = '6459088/6307k'). 20210927/114821.489 - U00003409 'INPUT' memory successfully allocated (address = '0x19e8cb0', length = '65536/64k'). 20210927/114821.490 - U00003409 'CONVERSATION' memory successfully allocated (address = '0x7fad44933010', length = '156144/152k'). 20210927/114821.490 - U00011849 UC4_sys_info: 'UC4 Version 12.3.6+hf.2.build.1628160649171' 20210927/114821.490 - U00011849 UC4_sys_info: 'BuildTimestamp 2021-08-05 13:16:35' 20210927/114821.490 - U00011849 UC4_sys_info: 'Buildnr: 1628160649171 Changelist: 1628084250' 20210927/114821.495 - U00021604 UCUMESS: Frequency: '000000000001000000', start at tick: '001632736101495811'. 20210927/114821.517 - U00003545 UCUDB: Opening database ... 20210927/114821.517 - U00029112 UCUDB - Length of the DB-History area: 100 20210927/114821.569 - U00029114 UCUDB - ALTER SESSION: NLS_LANGUAGE=AMERICAN 20210927/114821.569 - U00029114 UCUDB - ALTER SESSION: NLS_TERRITORY=AMERICA 20210927/114821.570 - U00029109 UCUDB: Local information from client environment 20210927/114821.570 - U00003535 DB INFO: 'OCI_NLS_LANGUAGE = AMERICAN' 20210927/114821.570 - U00003535 DB INFO: 'OCI_NLS_TERRITORY = AMERICA' 20210927/114821.570 - U00003535 DB INFO: 'OCI_NLS_CHARACTER_SET = WE8ISO8859P1' 20210927/114821.570 - U00029110 UCUDB - Session parameters: 20210927/114821.571 - U00003535 DB INFO: 'NLS_LANGUAGE = AMERICAN' 20210927/114821.571 - U00003535 DB INFO: 'NLS_TERRITORY = AMERICA' 20210927/114821.571 - U00003535 DB INFO: 'NLS_CURRENCY = $' 20210927/114821.571 - U00003535 DB INFO: 'NLS_ISO_CURRENCY = AMERICA' 20210927/114821.571 - U00003535 DB INFO: 'NLS_NUMERIC_CHARACTERS = .,' 20210927/114821.571 - U00003535 DB INFO: 'NLS_CALENDAR = GREGORIAN' 20210927/114821.571 - U00003535 DB INFO: 'NLS_DATE_FORMAT = DD-MON-RR' 20210927/114821.571 - U00003535 DB INFO: 'NLS_DATE_LANGUAGE = AMERICAN' 20210927/114821.571 - U00003535 DB INFO: 'NLS_SORT = BINARY' 20210927/114821.571 - U00003535 DB INFO: 'NLS_TIME_FORMAT = HH.MI.SSXFF AM' 20210927/114821.571 - U00003535 DB INFO: 'NLS_TIMESTAMP_FORMAT = DD-MON-RR HH.MI.SSXFF AM' 20210927/114821.571 - U00003535 DB INFO: 'NLS_TIME_TZ_FORMAT = HH.MI.SSXFF AM TZR' 20210927/114821.571 - U00003535 DB INFO: 'NLS_TIMESTAMP_TZ_FORMAT = DD-MON-RR HH.MI.SSXFF AM TZR' 20210927/114821.571 - U00003535 DB INFO: 'NLS_DUAL_CURRENCY = $' 20210927/114821.571 - U00003535 DB INFO: 'NLS_COMP = BINARY' 20210927/114821.571 - U00003535 DB INFO: 'NLS_LENGTH_SEMANTICS = BYTE' 20210927/114821.571 - U00003535 DB INFO: 'NLS_NCHAR_CONV_EXCP = FALSE' 20210927/114821.571 - U00003535 DB INFO: 'SID = 3046' 20210927/114821.572 - U00029111 UCUDB - Database parameters: 20210927/114821.574 - U00003535 DB INFO: 'NLS_RDBMS_VERSION = 12.1.0.2.0' 20210927/114821.574 - U00003535 DB INFO: 'NLS_NCHAR_CONV_EXCP = FALSE' 20210927/114821.574 - U00003535 DB INFO: 'NLS_LENGTH_SEMANTICS = BYTE' 20210927/114821.574 - U00003535 DB INFO: 'NLS_COMP = BINARY' 20210927/114821.574 - U00003535 DB INFO: 'NLS_DUAL_CURRENCY = $' 20210927/114821.574 - U00003535 DB INFO: 'NLS_TIMESTAMP_TZ_FORMAT = DD-MON-RR HH.MI.SSXFF AM TZR' 20210927/114821.574 - U00003535 DB INFO: 'NLS_TIME_TZ_FORMAT = HH.MI.SSXFF AM TZR' 20210927/114821.574 - U00003535 DB INFO: 'NLS_TIMESTAMP_FORMAT = DD-MON-RR HH.MI.SSXFF AM' 20210927/114821.574 - U00003535 DB INFO: 'NLS_TIME_FORMAT = HH.MI.SSXFF AM' 20210927/114821.574 - U00003535 DB INFO: 'NLS_SORT = BINARY' 20210927/114821.574 - U00003535 DB INFO: 'NLS_DATE_LANGUAGE = AMERICAN' 20210927/114821.574 - U00003535 DB INFO: 'NLS_DATE_FORMAT = DD-MON-RR' 20210927/114821.574 - U00003535 DB INFO: 'NLS_CALENDAR = GREGORIAN' 20210927/114821.574 - U00003535 DB INFO: 'NLS_NUMERIC_CHARACTERS = .,' 20210927/114821.574 - U00003535 DB INFO: 'NLS_NCHAR_CHARACTERSET = AL16UTF16' 20210927/114821.574 - U00003535 DB INFO: 'NLS_CHARACTERSET = WE8ISO8859P1' 20210927/114821.574 - U00003535 DB INFO: 'NLS_ISO_CURRENCY = AMERICA' 20210927/114821.574 - U00003535 DB INFO: 'NLS_CURRENCY = $' 20210927/114821.574 - U00003535 DB INFO: 'NLS_TERRITORY = AMERICA' 20210927/114821.574 - U00003535 DB INFO: 'NLS_LANGUAGE = AMERICAN' 20210927/114821.574 - U00029115 UCUDB - OPEN Database handles DB-HENV: 1ae6820 DB-HDBC: 0 20210927/114821.575 - U00003535 DB INFO: 'DATABASE-NAME = REBTEST6' 20210927/114821.575 - U00003535 DB INFO: 'DBMS-NAME = Oracle Database 12c Enterprise Edition' 20210927/114821.576 - U00003535 DB INFO: 'DBMS-VER = 12.1.0.2.0 - 64bit Production' 20210927/114821.576 - U00003535 DB INFO: 'ODBC-VER = ODBC not used' 20210927/114821.576 - U00003535 DB INFO: 'DRIVER-NAME = Oracle Call Interface' 20210927/114821.576 - U00003535 DB INFO: 'DRIVER-ODBC-VER =' 20210927/114821.576 - U00003535 DB INFO: 'DRIVER-VER = Compiled Jul 15 2021' 20210927/114821.576 - U00003535 DB INFO: 'ODBC-API-CONFORMANCE =' 20210927/114821.576 - U00003535 DB INFO: 'TXN-CAPABLE =' 20210927/114821.576 - U00003535 DB INFO: 'DEFAULT-TXN-ISOLATION =' 20210927/114821.576 - U00003535 DB INFO: 'TXN-ISOLATION-OPTION =' 20210927/114821.576 - U00003535 DB INFO: 'POS-OPERATIONS =' 20210927/114821.576 - U00003535 DB INFO: 'POSITIONED-STATEMENTS =' 20210927/114821.576 - U00003535 DB INFO: 'SCROLL-CONCURRENCY =' 20210927/114821.576 - U00003535 DB INFO: 'SCROLL-OPTIONS =' 20210927/114821.576 - U00003535 DB INFO: 'STATIC-SENSITIVITY =' 20210927/114821.576 - U00003535 DB INFO: 'LOCK-TYPES =' 20210927/114821.576 - U00003535 DB INFO: 'ODBC_TRACE = 0' 20210927/114821.579 - U00003532 UCUDB: Checking data source ... 20210927/114825.281 - U00003533 UCUDB: Check of data source finished: No errors. Performance CPU/DB: '31866024'/'438 (1000/2.281026 s)' 20210927/114825.281 - U00003544 UCUDB: Reference values tested with Windows 2003 on XEON 1500 MHz: CPU 813865, DB 470 20210927/114841.354 - U00029108 UCUDB: SQL_ERROR Database handles DB-HENV: 1ae6820 DB-HDBC: 0 20210927/114841.354 - U00003591 UCUDB - DB error info: OPC: 'OCIStmtExecute' Return code: 'ERROR' 20210927/114841.354 - U00003592 UCUDB - Status: '' Native error: '1013' Msg: 'ORA-01013: user requested cancel of current operation' 20210927/114841.354 - U00003536 UCUDB: FATAL DATA BASE ERROR: Re-connection will be attempted in 10 seconds. 20210927/114841.402 - U00003538 UCUDB: Re-connection to database successful. Processing will continue. 20210927/114846.403 - U00000006 DEADLOCK or Connection to database lost - Rollback handling initiated. See previous messages. 20210927/114846.403 - U00003594 UCUDB Ret: '6' opcode: 'OPEN' SQL Stmnt: '' 20210927/114846.403 - U00003524 UCUDB: ===> Time critical DB call! OPC: 'OPEN' time: '24:907.422.000' 20210927/114846.403 - U00003525 UCUDB: ===> '' 20210927/114846.403 - U00003611 DB OPEN executed. Return Code = '0000000006' 20210927/114846.404 - U00000006 DEADLOCK or Connection to database lost - Rollback handling initiated. See previous messages. 20210927/114846.404 - U00003410 Server 'AE12#WP' version '12.3.6+hf.2.build.1628160621897' ended abnormally.