robot_update_secure-9.20SHF10
Release Date: 3rd March 2020
Applicable for: UIM 9.20

Description
1) Issues Fixed :
DE442678 : 20141321 - Alarms from cdm probe not being cleared - cdm MCS Enhanced Profile


Versions of robot_update_secure affected: UIM 9.20 and older hotfixes

Reason: Alarm are not being cleared if there are more than one alarm condition.

Resolution: Added fix to clear alarm for all the condition.

DE449810: 
Reason: In windows one port is assigned to probe and tunnel both which will cause some probe to not work properly. 
Resolution: Added a configuration parameter (tunnel_port_reuse) if user face the connection time performance issue in tunnel connections. Defaul value is false.
			Windows: If enabled in windows then add the parameter "first_tunnel_port=PORT_NUMBER" in the hub.cfg under hub section. 
					PORT_NUMBER: higher value then all the probes ports. ex: first_tunnel_port > 48000 + "Total number of probes"
					
Previous fixes rolled-up:
DE439598 : 20093616 - IBM UIM ACL handling RCE and Probe DoS vulnerabilities
DE438598 : 20101721 - UIM nimbuscontroller RCE vulnerability
DE446059 : 20283338 - Hub 9.20HF6 memory leak with robot 9.20HF7; eventually stops snmpcollector QOS collection
DE441542 : 20111208,20219379 - Atualização de Robô - Alto consumo de memória Hub
DE438301: 20100511 - passive robot (controller) generates illegal SID error
DE430739:20058295 | Secondary Hub stops to send QOS from ALL probes AFTER Upgrade to 9.20
DE427614:20040794,20033089 not getting any xendesktop metrics
DE438202: 20097684 - UMP UI keep showing the error message. The message is disappearing after a refresh of browser. However, it keeps comes up after 10 mins approx.
DE436663:20089674 - policy_mode_enabled = true On MCS, but still see Alarms to configure in MCS
DE433772: 20075343, 20093286 - Migration of non-enhanced profiles to enhanced profile is not working.
DE434991: 20074324 - Operator Console Home Page Shows "Data Access Error" Dashboard Failed to Load
DE416073:(01353985,01360443): Tunnels cannot connect after SP1 not secure - 9.20SHF1	
DE431717: 20063366: Alarm Policy alarms do not contain the robot's user tags - 9.20SHF3
DE432590: 20069927: Robots are not failing over in a mixed secure robot 9.2hf3 environment - 9.20SHF4
DE435510: 20084151: Multiple instances of robot are running which cause CPU max out - 9.20SHF5


Dependencies: DE430739:(20058295) and DE427614:(20040794,20033089)--> These issues have dependency with Restmon Probe version 1.39HF1

Steps to apply the patch:
1. Import the zip into the local archive.
2. Deploy the imported package to the primary hub robot system and other hubs.

Related patches: robot_update-9.20HF10